SEMA eNews highlights new products from industry companies each week. To have your product considered for upcoming issues, send product press releases to editors@sema.org.
Metra Electronics
iBEAM Replacement Camera for Jeep Gladiator
iBEAM Vehicle Safety Systems by Metra Electronics released a new replacement camera designed for ’20-and-up Jeep Gladiator JT models. When replacing the radio on these vehicles, the factory LVDS backup camera presents a challenge for aftermarket screens and can be expensive to retain using an interface. iBEAM’s JP-JTKT camera replaces the factory camera to provide an affordable solution that allows the driver to see their backup video on a compatible aftermarket screen when in reverse.
The JP-JTKT has an RCA output for aftermarket radios or monitors with selectable parking lines and a 160-degree viewing angle. Two different types of camera mounting brackets are available to cover models equipped with either a standard backup camera or models equipped with surround or 360 systems. (Surround or 360 systems are not retained with this kit.)
FiTech
CAN Gauges
The new FiTech CAN Gauges (PN: 880828, 880829, and 880890) are a plug-n-play instrumentation solution for drivers utilizing FiTech’s electronic fuel injection and transmission controller systems. Monitor the speedometer, tachometer, or water temperature, quickly and conveniently by utilizing the existing FiTech sensors already setup on the vehicle.
The FiTech CAN Gauges feature through-the-dial white LED lighting with a lit pointer and match all existing AutoMeter Sport-Comp II gauges for seamless integration of non-CAN instruments to complete your entire dash. There is no need to run redundant sensors or gauge programming as everything is ready to go right out of the box to hookup to your existing FiTech systems.
Red Line Synthetic Oil
SuperCool BoilGuard
Red Line Synthetic Oil announced the launch of its new powersports antifreeze/coolant, SuperCool BoilGuard Fortified with WaterWetter. Formulated to lower coolant temperatures by as much as 20° F, the product is made for all two-stroke and four-stroke engines found in motorcycles, side-by-sides, ATVs, UTVs and snowmobiles.
Red Line’s new SuperCool BoilGuard is a pre-diluted, ready-to-use formula, designed to maximize the performance of powersports’ cooling systems where freeze protection is required.
Additionally, the product maintains superior protection against cavitation, corrosion, and erosion. SuperCool BoilGuard protects the entire cooling system, keeping new components in perfect condition while also preventing further damage to older components.
Go Rhino
CEROS Low Profile Roof Rack for Toyota Tacoma
Go Rhino's EROS Low Profile Roof Rack for ’16–’21 Toyota Tacoma Double Cab offers an aerodynamic, low-profile design that is application-specific and features Go Rhino’s exclusive 4-CORE mounting system.
The CEROS Rack features exclusive 4-CORE crossbars braced by an aluminum frame. The 4-CORE is an extruded track system of slotted bars that can accept any 1/4-in.-20 hex bolt or quick-release clamp, which means almost any accessory can be bolted to the rack. This system offers unlimited mounting options for accessories, gear and tools, which can be used interchangeably with Go Rhino’s 4-CORE-based XRS Xtreme Overland and SRM Roof Rack series.
The CEROS Rack was designed with integrated lighting options in mind. The frontmost crossbar can be used to mount a light bar or multiple cube lights, and the dropped edge of the fairing allows a single row light bar to remain flush with the frame’s topline, maintaining a sleek, streamlined look. Two openings along each of the rack’s side panels will fit most 6-in. single-row lights, which can be mounted with or without Go Rhino’s signature hex-patterned mesh screens. Along the frame’s upper lip, strategic mounting slots allow zip ties to be inserted to secure and hide the wiring from your lights.
Aeromotive
'82-'92 Camaro 200 & 340 LPH Fuel Pump & Hanger
Upgrading your third- or fourth-generation Camaro fuel pump has never been easier thanks to our new Direct Drop-In Module. These assemblies fit directly into the stock fuel tank and can support up to 1,000 hp. Every module is available with the option of a 200-lph fuel pump or Stealth 340 pump.
Aeromotive’s ’82–’92 Camaro 200 and 340-LPH Fuel Pump and Hanger makes upgrading third- or fourth-generation Camaro fuel pumps an easier process with assemblies that fit directly into there stock fuel tank and support up to 1,000 hp.
Every module is available with the option of a 200-LPH fuel pump or Stealth 340 pump.
Raptor Series
Magnum
Magnum by Raptor Series has introduced the newest addition to the company's growing product line with the Magnum RT Gen 2 Steps. The new design features a new and improved, 30% larger step area with raised slots providing easier vehicle entry and exit.
The steps are constructed of heavy-duty 14-gauge steel and designed to bolt to factory mounting locations using vehicle-specific mounting brackets. Magnum RT Gen 2 Steps are also coated with a 3 stage durable black powder coat finish that resists corrosion against elements.