 |
| Visit YEN's website. |
“Networking: Making Personal Contact” – Part 2 of 5
In part one, we kicked things off with “A Strategy for Every Stage of Career Development” and a focus on the different types of networking. Now, let’s get started with “Making Personal Contact.”
Before you actually begin making personal contacts, do some homework. Begin with yourself. What is your purpose? Do you have a career or industry focus, or are you seeking contacts who might serve as resources to help you discover your interests and desires?
Follow your hunches about the industries and work functions that you think would most interest you and do some background research that might enrich any conversation or exchange you will have with the people who are actually in that line of work. Continue your homework after defining your purpose and researching industries or work functions by beginning to build your network of contacts, which includes learning as much as you can about the people you will be contacting.
Start to build your network by listing your natural acquaintances and contacts. Ask yourself, “Who do I know?,” and add anyone who comes to mind to your list. Your goal at this stage is to connect with your natural network to discover not only if they have direct advice, but also if they know of others more closely affiliated with your interests. Those individuals might be found through:
- The SEMA Young Executives Network
- Other industry professionals
- Family and their friends
- Friends and their families
- Professors, advisers, coaches
- Former or present work colleagues
Before your list is complete, have you consulted your social networks? That’s right, have you looked at those connected to you through LinkedIn, Facebook, Plaxo, MySpace and MySEMA? Have you used these tools to seek out individuals from your past? Your high school? College? Former places of employment? You’ll find a wealth of knowledge using these online resources.
Reach out to those contacts. Let them know your interests and aspirations. The more people who know of your interests, the greater the chance those doors will open for you. Your chances of being in the right place at the right time are increased when you are attentive to this fact. It’s sometimes called “managing your luck.”
Before you make contact (with either your natural network or new people discovered through them), prepare your introduction or “elevator speech.” Your elevator speech is that 30-second introduction that provides others with just the essentials they’ll need to know about you and your interests. This step will also be useful for those unpredictable moments when you are presented the opportunity to connect with someone new (e.g., on the flight home or at a social function).
Your elevator speech should include such essentials as:
- Your name
- Why you are in contact
- What you are seeking
So, what’s your elevator speech and how will you use at your next event? Next week, we’ll focus on part three – “Expanding Your Network.”
Join YEN
Did
you know that the SEMA Young Executives Network has more than 500
members networking in the industry and is the largest SEMA committee?
If you are employed by a SEMA-member company and are under the age of
39, then you can join the SEMA Young Executives Network for FREE. If
you are interested in becoming part of the team, please visit our
website at www.sema.org/yen.
YEN Member of the Month Spotlight
Did you know that YEN has a Member of the Month Spotlight on the SEMA
website and that anyone can be nominated? To view previous selections
or to make a nomination, visit www.sema.org/yen.
Are you on Facebook, LinkedIn or Twitter? YEN is!
Be sure to follow YEN on all of your favorite social networking sites. To find these sites, go to www.sema.org/yen and use the links in the top right-hand corner.
YEN Column in SEMA Member News
Read YEN's column featured in the July/August issue of SEMA Member News.
For information about YEN, contact Angela Lee.
 |
| Visit ARMO's website. |
As a result of the recent elections, ARMO has four new members on the Select Committee. Todd Bidwell of Parts Unlimited and Camee Edelbrock of Schiefer Media each began their first term as a Select Committee member last Thursday, July 1. Matt Agosta of Steele Rubber Products, while “new” for this year, is actually beginning his second round on the Select Committee. Agosta is a former ARMO chair, and former SEMA Board of Directors member.
The complete ARMO Select Committee roster for 2010–2011 may be found on the ARMO website at www.sema.org/armo.
Are you on Facebook, LinkedIn or Twitter? ARMO Is!
Be sure to follow ARMO on all of your favorite social networking sites. To find these sites, go to www.sema.org/armo and use the links in the top right-hand corner.
ARMO Column in SEMA Member News
Read ARMO's column featured in the July/August issue of SEMA Member News.
For more information about ARMO, contact Jim Skelly.
 |
| Visit HRIA's website. |
The first annual HRIA Builders Pinewood Race was held in Pasadena, California, as part of the SEMA Show 'N Shine car show and Pinewood Drag Races. This new event featured some of the nation’s top hot-rod and custom car builders bending the rules of pinewood car racing to create one-of-a-kind creations for the track. Aside from required dimensions and weights, the only rule for the builders was to use at least one piece of the wood block provided.
All of the participating builders far exceeded the expectations for the race, creating masterpieces that will eventually be auctioned for Childhelp and Victory Junction Gang Camp.
Alan Johnson's Hot Rods and Pinkee’s Rod Shop chose to create their hot rods from billet aluminum, while Rich Evans Designs and Street Vizions went with a more traditional approach of forming their cars from wood. Other builders looked for loopholes in the rules, as Rob Ida Concepts and Cotati Speed Shop entered hot rods with only three wheels.
The cars built by Clay Smith Cams and Carl’s Custom Cars embodied the spirit of traditional hot rods, while Boerne Stage Kustoms paid tribute to the land speed bullets of the past. The paint skills of these builders was on display with great entries from Hot Rods & Custom Stuff and Fesler Built.
Finally,
Art Morrison engineered the most unique and advanced pinewood car in
the race, fabricating an actual chassis and suspension, along with ball-bearing wheels.
Although some of the cars look much better than they raced, all of
these pinewood cars are unique works of art. Derrick White with Street
Vizions captured the HRIA Cup by leaving all the other entrants in the
dust with his traditional hot-rod pinewood car. But, the true winners of
this event will be the kids of Childhelp and Victory Junction Gang Camp.
All of these cars will be on display at the SEMA Show in November, and
available for bidding on eBay beginning November 1. HRIA congratulates
Street Vizions and thanks all of these builders for their time and
dedication to this special event. Get ready for next year, as we are
sure the cars will be even more unique and wild as we add more great
builders to the race. Click here to see photos of the event.
Be sure to follow HRIA on all of your favorite social networking sites. To find these sites, go to www.sema.org/hria and use the links in the top right-hand corner.
HRIA Column in SEMA Member News
Read HRIA's column featured in the July/August issue of SEMA Member News.
For more information about HRIA and how to join, contact Zane Clark or call 909/978-6696.
 |
| Visit TORA's website. |
As a result of recent elections, TORA welcomes two brand-new Select Committee members. David Crocket of Rolling Big Power and Isaac Ronquillo of Big Country/Go Rhino Products began their first terms as select committee members last Thursday, July 1. The election results also included returning incumbents Tom Brooks of Truckin’ Thunder, Bill Cole of Yankee Customs Inc., Fred Snow of Hella Lighting and Melanie White of Hellwig Products.
The complete 2010–2011 TORA Select Committee may be found on the TORA homepage at www.sema.org/TORA.
Are you on Facebook, LinkedIn or Twitter? TORA Is!
Be sure to follow TORA on all of your favorite social networking sites.
To find these sites, go to www.sema.org/TORA and use the links in the top right-hand corner.
TORA Column in SEMA Member News
Read TORA's column featured in the July/August issue of SEMA Member News.
For more information about TORA, contact Jim Skelly.
 |
| Visit MPMC's website. |
Media Trade Conference Exhibitor Registration Now Open
MPMC-member companies may now register for one of the 100 available exhibitor suites at the 2011 MPMC Media Trade Conference. Exhibitor registrations must be submitted using the online registration form [here].
The 14th annual MPMC Media Trade Conference takes place on January 25–27, 2011, at the Embassy Suites LAX South in El Segundo, California. A maximum of 100 MPMC manufacturers are assigned a suite in the hotel and host as many as 42 one-on-one, 30-minute meetings with editorial staff from national and international automotive media.
Exhibitor registration is open until August 20, 2010. If more than 100 registrations are received by the deadline, then the 100 available suites will be assigned via lottery. See event Rules and Regulations or via the online registration form.
MPMC Welcomes New Select Committee Members
MPMC welcomes six brand new members to the Select Committee as a result of recent elections. They are:
- William Baty, Centerforce Clutches
- Todd Gartshore, Baer Inc.
- Scott Hall, Moroso Performance Products
- John Sonnefeldt, Holley Performance
- Steve Williams, K&N Engineering
- Gary Wright, Painless Performance Products.
“This year saw quite a turnover in the Select Committee,” said newly
installed Chairman Kyle Fickler of Weld Racing. “We have an interesting
mix of returning incumbents and fresh faces which should make for a
dynamic group. Vic Wood (newly installed chair-elect) and I are looking
forward to working with everyone.”
The MPMC Select Committee, with member profiles, can be seen on the MPMC homepage at www.sema.org/mpmc.
Are you on Facebook, LinkedIn or Twitter? MPMC Is!
Be sure to follow MPMC on all of your favorite social networking sites. To find these sites, go to www.sema.org/mpmc and use the links in the top right-hand corner.
Take a Friend to a Race Fan Page
The MPMC Motorsports Awareness campaign, highlighted by the Take a Friend to a Race program, now has its very own Fanpage on Facebook. If you’re not a fan yet, you should be!
MPMC Column in SEMA Member News
Read MPMC's column featured in the July/August issue of SEMA Member News.
For information about MPMC, contact Jim Skelly.
 |
| Visit MRC's website. |
MRC Long-Range Planning Meeting
MRC will host its annual Long-Range Planning meeting at the Arizona Grand Resort in Phoenix, on Tuesday, September 28, 2010, from 6:00 p.m.–10:00 p.m. Dinner will be served. All reps are welcome and encouraged to participate in this open and interactive forum.
Participate in the meeting: Be part of the present—be part of the future—address issues faced daily by reps in all segments of the automotive industry.
For meeting coordinators to be able to accommodate food and beverage, attendees are asked to take a moment and download the RSVP form, call 909/978-6693 or e-mail stacib@sema.org by September 15, 2010.
MRC Rep Conference Coming to Vegas!!
The 9th annual MRC Rep Conference moves to Las Vegas at the 2010
SEMA Show. Bryan Shirley, president and CEO of the Manufacturers’
Agents National Association will host an open and interactive session
titled “Survival of the Fittest! Is that You?” The economy has redefined the new automotive aftermarket…now it’s time to redefine yourself!
The MRC Rep Conference will convene at the Las Vegas Hilton on Sunday,
October 31, 2010, from 4:00 p.m.–6:30 p.m. The early-bird price for
SEMA members is $49 ($69 for non-members). Online event registration is now available! For additional information, contact SEMA Council Liaison Staci Bostock at 909/978-6693 or stacib@sema.org.
Are you on Facebook, LinkedIn or Twitter? MRC is!
Be sure to follow MRC on all of your favorite social networking sites. To find these sites, go to www.sema.org/mrc and use the links in the top right-hand corner.
MRC Column in SEMA Member NewsRead MRC's column featured in the July/August issue of SEMA Member News.
For information about MRC, contact Staci Bostock.
 |
| Visit PRO's website. |
What exactly do the council leaders do throughout their term? Very
simply, the Select Committee is elected by members of the council to
serve a two-year term. They participate in monthly conference calls and
meetings that are held at various trade events throughout the year.
Each Select Committee member volunteers for at least 20 hours
throughout the year, and some volunteer even more. Some share their
experience and vision, others provide creative solutions to challenges
our member companies are facing and others get their hands dirty and
get it done. Each Select Committee member is supported by their company
in their PRO efforts, and for that we say, “thank you,” to those
companies!
The leaders of the PRO gathered earlier this year in Lima, Ohio, for
its annual Long-Range Planning meeting. This meeting focused on
bringing value to the PRO-member companies. The past 18 months have
been extremely challenging for all of our companies, and the council is
dedicated to utilizing SEMA’s resources to further benefit each PRO
member.
Guiding the group’s effort was the council’s mission statement to “address
the challenges facing the restyling segment of the automotive
aftermarket and to develop effective strategies for dealing with
industry-specific issues.” A handful of exciting objectives are
being developed for the council over this year and next. If you are
passionate and have an interest in being involved, there are plenty of
opportunities to volunteer for a task force with a limited investment
of time that provides a great way to network and share your ideas.
Please reach out to the task force chair if you want to participate or
have comments.
Education Task Force
Brian Champa (Check Corporation) and Bill North (Webasto Product North America) co-chair this task force and can be reached at bchampa@checkcorp.com or bill.north@webasto-us.com.
The education task force is charged with developing successful programs
for members to enhance their businesses. The Technical Skills &
Training Conference (TSTC) recently launched, and the group is tasked
with expanding the number of events each year to ensure that training
and education become primary drivers for our industry.
NovemberFest Task Force
Mike Stanifer (Innovative Creations Inc.) chairs this group and can be reached at mike@icionline.com. The SEMA Show
in Las Vegas provides the backdrop for critical networking functions.
This group focuses on making PRO’s awards reception the place to be and
offering a fun forum to bring passionate members with common interests
together.
Membership Task Force
Joey Johnston (Tops & Trends) chairs this group and can be reached at joey@topsandtrends.com.
The success of any council or initiative is dependent upon its members.
This task force focuses on growth, promotion and retention. It is
important that we mentor new members on council activities, events,
meetings and benefits.
ProPledge Task Force
David Stringer (Insignia Group) chairs this group and can be reached at dstringer@insigniagroup.com.
The purpose of this group is to promote industry standards and to
improve the perception of aftermarket installations throughout the
restyling industry. ProPledge offers dealers a warranty program and is
committed to delivering quality products and services.
There are so many other things the council leadership does throughout
the year. You are the expert at what your business needs, and this
council wants to deliver. Feel free to get in touch with us or come to
one of our PRO events. Our hope is that if you haven’t been a part of
PRO yet, you will be in 2010 and beyond.
Are you on Facebook, LinkedIn or Twitter? PRO Is!
Be sure to follow PRO on all of your favorite social networking sites. To find these sites, go to www.sema.org/pro and use the links in the top right-hand corner.
PRO Column in SEMA Member News
Read PRO's column featured in the July/August issue of SEMA Member News.
For information about PRO, contact Zane Clark or call 909/978-6696.
 |
| Visit SBN's website. |
“I’ll get by with a little help from my friends…” - Joe Cocker
Everyone needs help or expert advice from time to time, and SEMA’s
Mentoring Program is an excellent resource to get answers to all your
questions. Whether you need to know more about SEMA, market information
for a start-up company or advice on how to approach your boss about a
new position, the SEMA Mentoring Program can help.
“Ask A
Mentor” is perfect for one-time questions. You can expect multiple SEMA
mentors to provide online guidance and answers to your industry-related
questions.
Short-term Assistance/Guidance is for help with a
specific project or task. A SEMA council/committee mentor with the
expertise you seek will be paired up with you to provide guidance with
your project.
Long-term Relationship is helpful for developing
your professional career. In this program segment you will be paired
with a SEMA council/committee mentor who will provide guidance and
assistance for ongoing career development or a long-term project.
So whether you just need an answer to a question or you want to
cultivate a mentoring friendship, the SEMA Mentoring Program—Powered by
the SBN is available to help. After all, we can all use a little help
from our friends.
Visit the SEMA Mentoring Program now.
Are you on Facebook, LinkedIn or Twitter? SBN is!
Be sure to follow SBN on all of your favorite social networking sites. To find these sites, go to www.sema.org/sbn and use the links in the top right-hand corner.
SBN Column in SEMA Member News
Read SBN's column featured in the July/August issue of SEMA Member News.
For information about SBN, contact Angela Lee.
 |
| Visit SPC's website. |
Participate in the automotive aftermarket at a whole new level by joining the SPC.
The purpose of SEMA councils is to help our member companies succeed and prosper. In the SPC, our mission is to provide market information, education and support to our members concerning new and emerging trends. Whether it’s the latest business technology, forecasting sales, future marketing solutions or up and coming vehicle platforms, we give you and your company the chance to see what’s on the horizon.
Then we’ll help you understand and acquire the skills, tools and
technologies to lead the way. The SPC has the most diverse membership
of any SEMA council, and that will allow you to network with other
professionals from every facet of our industry and gain insights into
areas you may not have previously considered. Find out about the parts,
people, technologies, strategies, trends and, most important,
possibilities.
This is your chance to give something back to the industry, your
profession and to grow personally along the way. Join the SPC today and
become an active member of the specialty equipment and automotive
market — Tracie Nuñez, Advanced Clutch Technology, SPC Chairman
Are you on Facebook, LinkedIn or Twitter? SPC is!
Be sure to follow SPC on all of your favorite social networking sites. To find these sites, go to www.sema.org/spc and use the links in the top right-hand corner.
SPC Column in SEMA Member News
Read SPC's column featured in the July/August issue of SEMA Member News.
For information about SPC, contact Angela Lee.
 |
| Visit WTC's website |
What exactly do the council leaders do throughout their term? Very simply, the Select Committee is elected by members of the council to serve a two-year term. They participate in monthly conference calls and meetings that are held at various trade events throughout the year. Each Select Committee member volunteers for at least 20 hours throughout the year, and some volunteer even more. Some share their experience and vision, others provide creative solutions to challenges our member companies are facing and others get their hands dirty and get it done. Each Select Committee member is supported by their company in their WTC efforts, and for that we say “thank you” to those companies!
The leaders of the WTC gathered earlier this year at SEMA headquarters in Diamond Bar, California, for its annual Long-Range Planning meeting. This meeting focused on bringing value to the WTC-member companies. The past 18 months have been extremely challenging for all of our companies and the council is dedicated to utilizing SEMA’s resources to further benefit each WTC member.
Guiding the group’s effort was the council’s mission statement to “identify common problems and opportunities relating to the wheel and tire industries that the council, as an interested body of companies, can address for the common good.” A handful of exciting objectives are being developed for the council over this year and next. If you are passionate and have an interest in being involved, there are plenty of opportunities to volunteer for a task force with a limited investment of time that provides a great way to network and share your ideas. Please reach out to the task force chair if you want to participate or have comments.
Science and Technology Task Force
Tim Dietz (Standards Testing Laboratories Inc.) and can be reached at tdietz@stllabs.com. This group focuses on aftermarket and OEM advances that affect our industry. From creating wheel standards to improved processes for tire-pressure monitoring systems and electronic stability control, the Science and Technology Task Force plays a pivotal role in the industry’s advancement.
Education Task Force
Kelly Austin (Ultra Wheel Company) chairs this group and can be reached at kelly@mail.ultrawheel.com. The education task force is charged with developing successful programs for members to enhance their businesses. The WTC Task Force is responsible for partnering with the SEMA Educational Institute to create and promote online learning resources.
Communication and Marketing Task Force
Doug Frymer (Law Offices of Douglas A. Frymer) chairs this group and can be reached at legal@starshieldarmor.com. This group focuses on membership outreach, growth and retention. It is imperative that councils effectively communicate services provided by WTC and SEMA to our members. Communication and services ensure that there is proper dialogue between leadership and membership.
SEMA Show Task Force
David Insull (American Tire Distributors) chairs this group and can be reached at dinsull@atd-us.com. The SEMA Show in Las Vegas provides the backdrop for critical networking functions. This group focuses on making WTC’s awards reception an ideal place to get together, honor one another and network with all those who share a common passion.
There are so many other things the council leadership does throughout the year. You are the expert at what your business needs and this council wants to deliver. Feel free to get in touch with us or come to one of our WTC events. Our hope is that, if you haven’t been a part of WTC yet, you will be in 2010 and beyond.
Are you on Facebook, LinkedIn or Twitter? WTC is!
Be sure to follow WTC on all of your favorite social networking sites. To find these sites, go to www.sema.org/wtc and use the links in the top right-hand corner.
WTC Column in SEMA Member News
Read WTC's column featured in the July/August issue of SEMA Member News.
For information about WTC and how to join, contact Zane Clark or call or 909/978-6696.