Performance Products: Go-Fast Parts and Pieces From SEMA360

SEMA News—March 2021

NEW PRODUCTS

Compiled by SEMA News Staff

Go-Fast Parts and Pieces From SEMA360

The performance products market—including products for engine and drivetrain, performance ignition, intake and exhaust, cooling, safety and race gear—is one of the largest and most robust in the automotive aftermarket. While many specialty-equipment market segments saw declines in sales in the wake of the COVID-19 disruption last spring, sales of performance products held steady in 2020, generating an estimated $10.6 billion in revenues, according to the 2020 “SEMA Market Report.”

At the 2020 SEMA360 New Products Showcase, more than 2,000 new products were on display. Noteworthy among them were the new-product award winners in the Performance and Racing categories. These included AEM Electronics’ PDU-8 Power Distribution Module (Performance—Racing) and Dash Logic’s SensorTap AIT Relocation Module (Performance—Street). Also worthy of mention were the following runners-up: Performance Electronics’ Dual Channel PE-Wideband 02 Kit and PE3-IG98 Ignition Controller (both Performance—Racing), and Red Roberts’ Accuvalve and Edelbrock Group’s Powerhouse Retainer Degree Gauge Tool (both from SEMA360 “Performance—Street”
category).

What follows is a listing of racing and performance parts that were on display at the SEMA360 2020 New Products Showcase, along with insights and observations from a number of industry leaders.

AEM Performance Electronics

PDU-8 Power Distribution Module

The PDU-8 controls switched devices on EVs using a vehicle control unit or on combustion engine race cars using an Infinity ECU. The eight-channel power distribution unit provides CAN-directed switched power to the various systems by receiving its commands directly from a vehicle control unit.

310-484-2322 x254
www.aemev.com/products/power-distribution-unit-pdu-8
PN: 30-8300

AEM Performance Electronics
V3 Water/Methanol Injection System

Water/methanol injection reduces engine inlet air temperatures and suppresses harmful detonation. The injector design uses a unique swirl generator technology to improve atomization for faster inlet temperature cooling and less fluid to maintain inlet air cooling.

310-484-2322 x254
www.aemelectronics.com/products/water-methanol-injection
PN: 30-3300

Aeromotive Fuel Systems
Direct-Fit Pump Modules for ’11–’17 Mustangs

The direct drop-in unit to the OEM tank with no drilling or fabrication required allows for the use of the OEM sending unit. A bracket provided accepts the OEM sending unit. Uses patented Aeromotive jet siphon in conjunction with OEM jet siphon pickup. The system variations offered are Single 450, Dual 450, Triple 450 and Dual 340.

913-647-7300
www.aeromotiveinc .com
PN: 18038

Alcon Specialist Brakes & Clutches
Porsche Replacement Rotors

Replacement rotor/hat assemblies for Porsche 991, 997, 996 and 981. Machined in Mooresville, North Carolina, from cast iron, providing the best in thermal stability, friction coefficient and heat-transfer characteristics. Pre-bedded, ready to race. Precision-machined and anodized aluminum hats.

704-799-2723
www.alcon.co.uk
PN: ROX1013XX

Aeromotive Fuel Systems
Fuel Pump and Hanger for ’88–’98 C/K 1500/2500 Chevy Trucks

This product has really picked up steam since its release. It’s a plug-and-play direct-replacement pump option for ’88–’98 C/K 1500/2500 Chevy trucks. The market is asking for quick and easy solutions, and this is one from Aeromotive. The product came from a need from Gas Monkey Garage.

913-647-7300
www.aeromotiveinc.com
PN: 18379

Alcon Specialist Brakes & Clutches
Corvette C7 Front and Rear Brake Upgrade

Pro-System rotors, hats and hardware. Made in the U.S.A. Dyno-bedded rotors and pads. Precision-machined and anodized aluminum hats. Fully floating attachment with anti-rattle clips. Utilizes stock parking brake Alcon calipers: six pistons front, four pistons rear. Forged aluminum calipers used in top-level pro racing. High-temperature seals.

704-799-2723
www.alcon.co.uk
PN: BRK.200516

Alcon Specialist Brakes & Clutches
GTR Replacement Rotors

GTR replacement rotors. Front 380 and 390 mm. Rear 380 mm. Alcon Motorsport disc rings and hardware. C-Groove Motorsport face type 48-vane ventilation. These use the same technology as the discs found in the Super Kit but sized to fit the OE calipers.

704-799-2723
www.alcon.co.uk

Amsoil Inc.
SAE 0W-20 LS Synthetic European Motor Oil

Outstanding protection in high-temperature conditions and dependable performance throughout the long drain intervals European manufacturers recommended. Engineered for vehicles requiring BMW LL-17FE+ or MB 229.71. Specifically crafted for sophisticated European gas and diesel engines.

715-392-7101
www.amsoil.com
PN: AFEQT

Amsoil Inc.
SAE 0W-20 LS-VW Synthetic European Motor Oil

Provides outstanding protection in high-temperature conditions and dependable performance throughout the long drain intervals European manufacturers recommended. Engineered for vehicles requiring VW 508.00/509.00. Specifically crafted for sophisticated European gas and diesel engines.

715-392-7101
www.amsoil.com
PN: EZTQT

ASNU
1,450cc Injector

The new ASNU 1,450-cc injector is a 15-hole orifice plate injector that comes with the U.S. Car Connector instead of the Bosch Mini Timer. As with the ASNU general range of performance injectors, this is available in numerous manifold fitments when ordered to suit various applications. As usual, every set is custom built to order.

208-420-4494
www.asnu.com

ASNU
40P Injector

The new ASNU 40P fuel injector is exclusively produced for ASNU by Robert Bosch. The 40P is a Bosch Compact EV14 with an extended tip and a seven-hole orifice plate to give a very fine conical spray pattern, a 12-ohm coil and a flow rate of 1,150 cc at 3 Bar on gasoline. This is the perfect step up from its sister injector, the Bosch 1,000cc.

208-420-4494
www.asnu.com
PN: ASNU40P

ATI Performance Products Inc.
SFI Flexplate and Crank Adapter for Toyota Supra B58

The Toyota Supra B58 flexplate is an SFI version available for the B58 engine. This flexplate and 915082 crank adapter allow the use of the OEM converter and flexplate bolts. ATI’s nearly 60 years of cutting-edge technology offer maximum concentricity for a high-quality, long-lasting flexplate that will not damage other components.

800-284-3433
www.atiracing.com
PN: 915472

ATI Performance Products Inc.
NHRA-Legal Factory Shootout 5% OD Ford Super Damper

800-284-3433
www.atiracing.com

ATI Performance Products Inc.
8L90E C7 Corvette 300M Output Shaft

ATI’s 300M 8L90E output shaft is a brand-new direct replacement for all C7 Corvettes and ZR1s equipped with the eight-speed 8L90E transmission. This output shaft is a direct replacement—no modifications are needed. ATI says that the quality of this output shaft is second to none. In stock and ready to ship.

800-284-3433
www.atiracing.com
PN: 704050

ATI Performance Products Inc.
Super Damper for Ford 7.3L Godzilla Engine

For the Ford 7.3L Godzilla engine, found in Super Duty trucks, some vans and as a crate engine. This OEM drive diameter damper features a 6-in., five-ring inertia weight, retains the OEM location and has OEM drive sizes. The shell is billet aluminum with a 4140 hub. Laser-etched timing marks, single 3/16 keyway. Exceeds SFI 18.1 safety certification.

800-284-3433
www.atiracing.com
PN: 918073

“The current overall performance market was extremely strong in 2020. I think most companies felt business would crash when the COVID-19 virus hit—and we did see business slow down in April. Then business came back with a vengeance. I believe people have been restricted in their activities, such as going out to eat, going to the ballpark, taking cruises or going to Disneyland.

The one thing a person can do is work on that project car or race car that they’ve had in the garage. They now have some extra money and time to pour into their hobby, and the result is an increase in business for the industry.”—Russell Stephens, Vice President of Sales and Marketing, PerTronix Performance Brands

AutoMeter
FiTech CAN Gauges

AutoMeter says that its new FiTech CAN gauges are the perfect solution for performance enthusiasts who have converted their vehicles to FiTech’s electronic fuel injection and/or transmission controller systems. The tachometer, speedometer and water-temperature gauges plug-and-play into FiTech’s CAN output and match AutoMeter’s popular Sport-Comp II series.

815-895-8141
www.autometer.com

Baer Inc.
Classic 13-in. Early GM Front Brake System

Classic Series is an aluminum two-piston caliper mounted to a 13-in. directional rotor that is a direct bolt-on for early GM Chevelles, Novas and Camaros (AFX). Features red-powdercoated aluminum calipers, braided brake hoses, an integral hub slot, a drill, zinc finish rotors and modern performance for affordable pricing.

602-233-1411
www.baer.com
PN: 4301551R

Baxter Performance
Toyota Cartridge-to-Remote Oil Filter Adapter

The new Toyota cartridge-to-remote oil filter adapter (multiport) features universal fitment for most Toyota engines. Fits 2.0L and larger engines; 4.6L and 5.7L engines require TX-001 extension collar (shown) for additional cost. Retains more engine oil post filtration for fast oil delivery and pressure at startup. The -10AN male fittings are included.

509-448-7951
www.baxterperformanceusa.com
PN: TR-501-BK

Baer Inc.
Classic 13-in. Early Mustang Front Brake System

The Classic Series features an aluminum two-piston front caliper mounted to a 13-in. rotor that is a direct bolt-on for early Mustang drum brake spindles. Also features red-powdercoated aluminum calipers, braided brake hoses, an integral hub slot, a drill, zinc-finish rotors and—best of all—modern performance for affordable pricing.

602-233-1411
www.baer.com
PN: 4261562R

Baxter Performance
MOPAR Cartridge-to-Spin-On Oil Filter Adapter

Fits ’14+ 3.6L Pentastar engines. Provides faster oil pressure at startup by keeping the upper oil system flooded. The adapter contains a full-flow check valve and a unique threaded locking mechanism. Utilizes a Schrader valve for oil evacuation when removing the spin-on filter. Made and
patented in the U.S.A.

509-448-7951
www.baxterperformanceusa.com
PN: MS-201-BK

Baxter Performance
MOPAR Cartridge-to-Remote Oil Filter Adapter

The new MOPAR cartridge-to-remote oil filter adapter fits ’14+ 3.6L Pentastar engines. Provides faster oil pressure at startup and the ability to relocate/convert to spin-on-style oil filter mounts. Also allows the ability to add an oil cooler or accumulator. All seals made of Viton. The -10AN male fittings are included. Made from 6061-T6 billet aluminum.

509-448-7951
www.baxterperformanceusa.com
PN: MR-201-BK

Baxter Performance
Ford Cartridge-to-Spin-On Oil Filter Adapter

Fits ’15+ 2.7L EcoBoost engines. Provides faster oil pressure at startup by keeping the upper oil system flooded. The adapter contains a full-flow check valve and utilizes a Schrader valve for oil evacuation when removing the spin-on filter. Accepts oil filters with 22x1.5 treads. Viton seals. Made in the U.S.A.

509-448-7951
www.baxterperformanceusa.com
PN: FS-101-BK

Baxter Performance
Ford Cartridge-to-Remote Oil Filter Adapter

Fits ’15+ 2.7L EcoBoost engines. Provides faster oil pressure at startup and the ability to relocate/convert to remote spin-on style oil filter mounts. Allows the ability to add an oil cooler or accumulator. #12 ports. All seals made of Viton. Machined from 6061-T6 billet aluminum. Made in the U.S.A.

509-448-7951
www.baxterperformanceusa.com
PN: FR-101-BK

Baxter Performance
Inverted Remote Oil Filter Mount

The inverted remote oil filter mount features a built-in oil-retaining well that contains excess oil upon filter removal. Accepts oil filter with 3/4-16 treads. Oil connections can be configured ports-left, ports-right or ports-bottom. Mounting bracket can be rotated in 90-degree increments for mounting flexibility. The -10AN male fittings are included. Made in the U.S.A.

509-448-7951
www.baxterperformanceusa.com
PN: RI-101-BK

Baxter Performance
Toyota Cartridge-to-Spin-On Oil Filter Adapter

The Toyota cartridge-to-spin-on oil filter adapter fits Toyota 1.8L engines. Retains more engine oil post filtration for fast oil delivery and pressure at startup. Converts cartridge oil filter to spin-on filter with 3/4-16 threads. Spring-loaded docking collar. All seals made of Viton. Machined from 6061-T6 billet aluminum. Made in the U.S.A.

509-448-7951
www.baxterperformanceusa.com
PN: TS-401-BK

Baxter Performance
Subaru Oil-Retaining Spin-On Adapter

The new spin-on Subaru oil filter adapter for top-mounted oil filters retains oil in the filter for faster oil delivery and pressure at engine startup. Patent-pending full-flow check valve prevents oil from draining from the output port of the oil filter. All seals made of Viton. Adapter body machined from 6061-T6 billet aluminum. Made in the U.S.A.

509-448-7951
www.baxterperformanceusa.com
PN: SS-101-BK

BD Diesel
Ford 6.7L Power Stroke Screamer Turbos

The drop-in, stock-appearing Screamer turbo for Ford 6.7L Power Strokes utilizes modern turbo technology that delivers increased air flow without compromising low-end response. Boost pressure can be increased to improve horsepower potential. Works with any box tuner; further improvements achieved with custom tuning.

800-887-5030
www.bddiesel.com
PN: 1045827

BD Diesel
CAT C15/3406E T6 Mount Exhaust Manifold

This three-piece, thick-walled exhaust manifold for Cat 3406E and C15 non-Acert engines is made with durable high-silicon ductile iron, which prevents cracking. Designed to mount T6 flanged turbos, the pulse exhaust flow is directed to the dual-volute T6 turbine, which improves turbo spooling response for quick, clean power.

800-887-5030
www.bddiesel.com
PN: 1048001

Bilstein Shock Absorbers
Evo SE

Evo SE is a coil-over kit built and tuned specifically for vehicles with factory electronic damping control. Ride-height adjustability and electronic damping control through the OE systems offer a true plug-and-play package. Threaded bodies allow for extreme lowering up to 70 mm. Designed and built in Germany. Tested and tuned on the Nürburgring.

858-386-5900
www.bilstein.com
PN: 49-303391

BlueDevil Products
Radiator Flush

BlueDevil radiator flush restores efficiency to vehicles by helping remove grease, rust, grime or any other buildup that occurs during normal vehicle use. The specially formulated coolant flush works well in all vehicles, especially those with high mileage that warrant a deep flush.

888-863-0426
www.gobdp.com
PN: 204

BlueDevil Products
Head Gasket Sealer

BlueDevil head gasket sealer will repair and seal leaks in blown head gaskets, warped or cracked heads, heater cores and freeze plugs. BlueDevil contains no solid or particulate matter and will not clog or harm the engine. It’s safe and easy to use as a permanent seal for head gasket leaks.

888-863-0426
www.gobdp.com
PN: 38386

BlueDevil Products
Fuel System Cleaner

BlueDevil complete fuel system cleaner will remove fuel deposits while increasing vehicle performance. Fuel MD improves gas mileage, fuel efficiency and vehicle startup, and it will restore a consistent engine idle while lowering fuel octane requirements—guaranteed.

888-863-0426
www.gobdp.com
PN: 202

BlueDevil Products
Oil Stop Leak

BlueDevil Oil Stop Leak seals engine oil leaks permanently. It is non-clogging and will not harm the engine. BlueDevil is safe and easy to use and is compatible in gasoline or diesel engines. The stop-leak additive solution is a guaranteed permanent repair.

888-863-0426
www.gobdp.com
PN: 49499

BluePrint Engines
Builder-Series, GM-Style, Big-Block 632 Assembled Engine and Transmission Package With Billet Front Accessory Drive

BluePrint Engines offers GM, Ford and Chrysler products for hot rods or musclecars and everything from basic engines up through fully assembled engine and transmission packages. Every engine is dyno tested, with a 30-month, 50,000-mi. warranty.

800-483-4263
www.blueprintengines.com
PN: B632FK4L8

BluePrint Engines
Builder-Series, GM-Style LS 427 Assembled Engine and Transmission Package With Billet Front Accessory Drive

800-483-4263
www.blueprintengines.com
PN: BLS427KB4L7

BluePrint Engines
Builder-Series, GM-Style Small-Block 427 Assembled Engine and Transmission Package With Billet Front Accessory Drive

800-483-4263
www.blueprintengines.com
PN: B427K700

BluePrint Engines
Builder-Series, Ford-Style 427 Assembled Engine and Transmission Package With Billet Front Accessory Drive

800-483-4263
www.blueprintengines.com
PN: BF427KTKOC

BluePrint Engines
Builder-Series, Chrysler-Style Small-Block 408 Assembled Engine and Transmission Package With Billet Front Accessory Drive

800-483-4263
www.blueprintengines.com
PN: BC408K727

BOOSTane, Octane Engineering
BOOSTane Professional

BOOSTane Professional is said to be the world leader in race fuel alternatives and the only additive in the industry that has the ability to transform 93-octane pump fuel into as high as a 116-octane race fuel equivalent. Committed to delivering race fuel performance without the hassle or cost of buying and transporting race fuel.

855-GETS-110
www.boostane.com
PN: OCT32PRO

BOOSTane, Octane Engineering
BOOSTane Premium

BOOSTane Premium is designed to raise regular pump fuel (93 or 91 octane) to as high as an effective 102-octane race fuel equivalent (or 100 if starting with 91). Perfect for applications that have poor fuel quality, high temperatures and only 91 octane available, and/or performance vehicles with bolt-on components.

855-GETS-110
www.boostane.com
PN: OCT16PRE

BOOSTane, Octane Engineering
BOOSTane Shot

BOOSTane Shot simplifies octane boosting. The 4-oz. bottled Shot formulation enables customers to increase octane three full numbers in a 16-gal. tank of gas and two full numbers in a 21-gal. tank. Users can go to the track with an added level of assurance and peace of mind that they can run hard on hot days without needing race fuel.

855-GETS-110
www.boostane.com
PN: OCT04SHOT10

Bully Dog & SCT Performance
SCT Livewire Vision Performance Monitor

The Livewire Vision Performance Monitor puts vital vehicle stats on display. This easy-to-use monitoring device includes the latest data logging capabilities to precisely measure each drive and uncover a vehicle’s power potential. Review vehicle data and
performance test.

407-774-2447
www.sctflash.com
PN: 5015PWD

Bully Dog & SCT Performance
SCT X4 Performance Programmer

Connects high-performance tunes to a vehicle for a boost in horsepower and torque. Awaken the engine to its real potential with preloaded, dyno-proven tune files through the easy-to-use functionality. Modify a variety of parameters at the touch of a button, all while monitoring gauges on a customizable display.

407-774-2447
www.sctflash.com
PN: 7015, 7215, 7416

Bully Dog & SCT Performance
Bully Dog BDX Performance Programmer

Gives drivers the power they need, whether tackling tough terrain, pulling a heavy payload or maximizing fuel economy on the highway. Its sleek design, full-color display and customizable gauges help track and adjust powertrain performance to deliver more horsepower and torque when it’s needed most.

940-783-9915
www.bullydog.com
PN: 40470

Bully Dog & SCT Performance
SCT Advantage III Custom Tuning Software

Advantage III software is an advanced custom tuning software that allows users to have complete control of their ECUs and the ability to tune their personal vehicles. Check out the Pro Racer Package. All software is nonrefundable, nontransferable. Must be purchased from a custom tuning dealer. Contact the Bully Dog sales department for more info.

407-774-2447
www.sctflash.com
PN: 4332

Carzoom
Headlights

Seven-inch round stock metal headlights, 7x6-in. square stock metal headlights, 53/4-in. Stock metal headlights, 4x6-in. square Stock metal headlights, halo-ring headlights.

646-204-7150
www.icarzoom.com

Cerebrum Smart Tire Technologies
Smart Tire Sensor Solution

A tire sensor capable of measuring advanced tire analytics, including pressure, temperature and tread depth. Cerebrum was released in 2019 and now features load measurement. Ideal for trucks, RVs and fleets. Cerebrum sensors can connect to most wireless receivers, and analytics are available in the mobile app and cloud for telematics.

424-272-5262
www.cerebrumsensor.com
PN: CEREBRUMBOOST

CFR Performance
LT1 Gen V Cast Manifolds for Engine Swaps

When swapping an LT1 Gen V engine into an older car, these cast manifolds are a must. They will fit nice and tight, giving users the clearance they need from tight frame rails without hurting the performance of the engine. Available in ceramic-coated silver or black. Hardware is included.

909-947-7888
www.cfrperformance.com
PN: HZ-9977-CER

Chevrolet
SUV Performance 6.2L Dual-Exit Cat-Back Exhaust

Bolt-on cat-back exhaust system fabricated with premium 304 stainless steel for improved corrosion protection. No calibration needed for performance gain of up to 11 hp and 6 lb.-ft. of torque. Available in single-exit and dual rear-exit configurations.

866-694-6546
www.chevrolet.com/performance
PN: 8488291

Chevrolet
SUV Performance Front Six-Piston Brembo Brake Upgrade

Features Brembo six-piston fixed aluminum calipers and larger-than-stock Duralife rotors for an 84% increase in brake pad area and a 42% increase in rotor area to increase thermal capacity. During testing, the performance brakes provided 31% reduction in pedal force at max deceleration and 12% reduction in pedal travel, improving pedal feel.

866-694-6546
www.chevrolet.com/performance
PN: 84766666

Chevrolet
SUV Performance Rear Brake Upgrade System

Designed to complement the front big-brake system, the Chevrolet Performance color-matched rear brake system includes painted bright-red calipers. The rear brake system maintains complete integration with the braking system and works seamlessly with the production parking brake system, so it will not void the new-vehicle limited warranty.

866-694-6546
www.chevrolet.com/performance
PN: 84436255

David Cardey “Our biggest growth in the last year or two has been in the truck and off-road market. From the typical level lift and performance shocks for daily-driven trucks to adjustable-height and variable load options for overlanders to complete performance spring systems for UTVs and race vehicles, we have seen massive growth. Regarding sales, the trend has shifted to more direct and online sales because of the social distancing that was experienced over the past year, and I don’t see that 100% reversing. I am sure it will trend back to brick-and-mortars once a vaccine is introduced, but I doubt that it will ever go back to exactly the way it was.”—David Cardey, Sales Manager, Eibach Inc.

Chevrolet
SUV Performance 6.2L Cold-Air Intake

Add an element of performance-oriented style to a vehicle with this Chevrolet Performance air-intake system. It looks great under the hood and includes an open-element air filter and all necessary installation hardware.

866-694-6546
www.chevrolet.com/performance
PN: 84854457

Chevrolet
350/265 Small-Block Engine

Chevrolet Performance has a wide portfolio of performance engines, and the 350/265 is the latest option for old-school small-block lovers. This value-based long-block engine is based on the original 350 V8 design but with a milder hydraulic-lifter cam that is daily-driver-friendly.

810-869-0024
www.chevrolet.com/performance

Chevrolet
LS427/570 (Wet Sump) 7.0L Gen IV Engine

Chevrolet Performance introduces a Gen IV LS engine that is 570 hp normally aspirated. This powerful 7.0L (427 ci) package is based on the iconic LS7 ZO6 and Z28 dry-sump engine with a bigger camshaft and a conversion to a wet-sump configuration. The wet-sump conversion allows many more builders to consider installing the LS427/570.

810-869-0024
www.chevrolet.com/performance

Chevrolet
L8T 6.6L Gen V Iron Cylinder Block

Chevrolet Performance introduces an L8T cast-iron Gen V engine block that is very likely completely new to even the most knowledgeable enthusiast. This 6.6L production block is the foundation for a direct-injected performance engine that may see more horsepower than a lightweight aluminum block was designed for.

810-869-0024
www.chevrolet.com/performance

Chevrolet
Gen IV LS3-Based Long Blocks

Chevrolet Performance listened to builders and is now introducing long-block Gen IV engines based on the LS3. These engines are identical to the complete LS3, LS376-480 and the LS376-525, with a few deletions. The engine is shipped without the intake manifold, throttle body, fuel rails, injectors, coil packs, ignition harness and exhaust manifolds.

810-869-0024
www.chevrolet.com/performance

Chevrolet
Performance Exhaust

810-869-0024
www.chevrolet.com/performance

Chevrolet
SuperMatic 10L90 Automatic Transmission

Chevrolet Performance is introducing the latest in transmission technology to pair with the Gen V-design LT family of direct-injected engines. The SuperMatic 10L90 10-speed automatic transmission includes a torque converter along with the transmission controller and calibration required to allow it to communicate with the engine.

810-869-0024
www.chevrolet.com/performance

Classic Instruments
66–’67 Chevy Nova Direct-Fit Gauge Set

Classic Instruments says that the ’66–’67 Nova direct-fit cluster is the perfect upgrade for Novas. It features six gauges placed cleanly into the confines of the factory bezel without ruining the stock look. The cluster is all-electric, so drivetrain swaps are no problem. Comes completely assembled and includes all the sending units needed for installation.

800-575-0461
www.classicinstruments.com
PN: NO66XX

Coker Tire
Phoenix Race Tires Stiff-Sidewall Slicks

The new line of Phoenix Race Tires stiff-sidewall bias-ply slicks offer ultimate traction for high-horsepower drag cars. The new line consists of a 10.5/28.0-15, which is a popular choice for No Prep drag racing in the small-tire category. For big-tire cars, Phoenix is also introducing two new stiff-sidewall sizes, 14.0/31.5-15 and 16.0/32.0-15.

800-251-6336
www.cokertire.com
PN: PH18S

Classic Instruments
AutoCross Full-Sweep Gauges

Classic Instruments AutoCross Full-Sweep Series Gauges offer track-proven precision and reliability for street machines. Available in gray or yellow backgrounds, AutoCross gauge sets include the necessary sending units for installation. Offered in several combinations to fit the application.

800-575-0461
www.classicinstruments.com
PN: AX301XXXX

Cometic Gasket Inc.
T3 Divided Turbo Inlet Flange Gasket, .016-in. Stainless

T3 Divided Turbo Inlet Flange Gasket, .016-in. stainless.

800-752-9850
www.cometic.com
PN: C15586

Cometic Gasket Inc.
GM LS1 V8 .060-in. HT Exhaust Header Gasket Set

GM LS1 V8 .060-in. HT Exhaust Header Gasket Set.

800-752-9850
www.cometic.com
PN: C15568HT

Cometic Gasket Inc.
Honda K20C1 .020-in. MLS Exhaust/Turbo Gasket

Honda K20C1 .020-in. MLS Exhaust/Turbo Flange Gasket.

800-752-9850
www.cometic.com
PN: C14022-020

Coplus Inc.
’08–’20 Nissan 370Z Full LED Taillight

An ’08–’20 Nissan 370Z taillight/sequential indicator/DOT- and ECE-compliant/Osram LED.

+886-6-2655599 x232
www.gobdp.com
PN: 11-NS011/12

CP-Carrillo/Arias
BMW B58 ’20 Toyota Supra Pistons and Rods

Pistons and connecting rods for the BMW B58-powered ’20 Toyota Supra designed for horsepower in excess of 1,200 BHP. Pistons utilize PVD (vacuum-sealed coated) rings with deeper and bigger valve pockets. H-beam designed connecting rods utilize a lipped cap for enhanced big-end stability. Parts fit Supra, BMW B58 and B48 engines.

949-567-9000
www.cp-carrillo.com

Covercraft Industries LLC
Carbon Stretch Vehicle Covers

Carbon Stretch Vehicle Covers

800-274-7006
www.covercraft.com/us/en/vehicle-covers

CP-Carrillo/Arias
CP-Carrillo Bullet Big-Block Chevy Rods

Made from a near net forging, these rods are designed to handle up to 1,200 hp and 8,500 rpm with a 400–500 shot of nitrous in drag-race applications. Available off the shelf in 6.385, 6.535, 6.700, 6.750 and 6.800 center-to-center lengths with standard BBC dimensions.

949-567-9000
www.cp-carrillo.com
PN: BC22

CP-Carrillo/Arias
High-End Steel Alloys for Drag Racing

CP-Carrillo’s new alloys are stronger respectively than the company’s traditional Carrilloloy, enabling optimized rod design to capitalize on stability while reducing weight. These materials are available only for custom designs and are supplied with CP-Carrillo’s Multiphase Carr fasteners.

949-567-9000
www.cp-carrillo.com

CP-Carrillo/Arias
GM LT Bullet Kit Pistons and Rods

No-balance GM LT Bullet piston and rod drop-in kit for LT1/L86 (6.2L) engines. The piston and rod assemblies match the factory bob weight, clear factory oil squirters and are capable of supporting 1,200 hp. Made in the U.S.A. from locally sourced materials. Features include 7/16 H11 tool steel fasteners and 0.200-in.-wall HD wrist pins; 10.5:1 compression.

949-567-9000
www.cp-carrillo.com
PN: GM LT BULLET KIT

CSF Cooling Racing & High Performance
B8 Audi S4 High-Performance All-Aluminum Radiator

Two-row, 42mm ultra-high performance core with CSF’s exclusive B-tubes. CNC-machined billet mounting integrated for precise fitment. Includes built-in OEM-style transmission oil cooler. Drop-In fit with no modifications necessary.

909-355-1991
www.csfrace.com
PN: 7091

CSF Cooling Racing & High Performance
Gen II/III Toyota Tacoma High-Performance All-Aluminum Radiator

Two-row, 42mm ultra-high performance core with 6.5mm-tall multi-louvered fins and CSF’s exclusive B-tubes. CNC-machined mounting brackets. 100% all-aluminum TIG-welded construction. True drop-in fit with no modifications necessary. Hand-polished mirror finish.

909-355-1991
www.csfrace.com
PN: 7092

CSF Cooling Racing & High Performance
McLaren 720S Twin Intercooler Set

Fifty-percent larger capacity compared to OEM. CNC-machined billet end tanks. Built-in methanol-injection ports. High-performance bar and plate intercooler cores. Featured on the world’s fastest McLaren 720S.

909-355-1991
www.csfrace.com
PN: 8186

CSF Cooling Racing & High Performance
Porsche 991.2/718 High-Performance All-Aluminum Side Radiator

Two-row, 42mm ultra-high performance core with CSF’s exclusive B-tubes. OEM-style quick-connect inlet/outlet. CNC-machined mounting bungs for precise fitment. Included weather stripping. Drop-in fit with no modifications necessary. Sold individually, separate part numbers for left/right.

909-355-1991
www.csfrace.com
PN: 7087

CSF Cooling Racing & High Performance
Porsche 944 High-Performance All Aluminum Radiator

Two-row, 42mm, ultra-high performance core with CSF’s exclusive B-tubes. Integrated overflow hose brackets (no more factory zip ties). Industry-exclusive high-performance all-aluminum design. Brushed satin finish with included yellow zinc hardware (European-style).
Dual 9 SPAL fans and fan shroud available.

909-355-1991
www.csfrace.com
PN: 7088

CSF Cooling Racing & High Performance
Porsche 991 GT2 RS Twin Intercooler Set

Eliminates heat soak and lowers IATs. Formula 1 performance-grade core by PWR (two rows featuring rolled tubes with inner fins). CNC-machined billet end tanks, 100% TIG-welded OEM-style inlet/outlet. Drop-in fit. Installation requires no modifications. R&D testing by BBi Autosport. Made in the U.S.A.

909-355-1991
www.csfrace.com
PN: 8166

CSF Cooling Racing & High Performance
Porsche 911/930 Turbo OEM+ Performance Oil Cooler

High-performance core with square fins (~10% better performance). Pressure tested to 8 bar (116 psi). Drop-in fit with slotted mounting holes. Temperature sender combination boss with three included fittings. M22x1.5 inlet/outlet for maximum flow. Accepts AN-16 fittings.

909-355-1991
www.csfrace.com
PN: 8168

CVF Racing
SBC Wraptor Serpentine System Roots-Style Supercharger

This Wraptor Serpentine System is designed and engineered around today’s popular roots-style supercharger drives, taking all the guesswork and fabrication away. Configured in Alt only, Alt+PS, Alt+AC and Alt+PS+AC configurations. Available in polished, C3 ceramic clear, stealth black anodized or black diamond finishes.

651-356-8593
www.cvfracing.com
PN: 350SC-WRAPTOR-AC

CSF Cooling Racing & High Performance
Toyota GR Supra (A90/91) and BMW G-Series Front-Mount Heat Exchanger

Lowers IATs and improves air flow to the cooling system. Two-row, 42mm high-performance core with 6.5mm-tall multi-louvered fins and CSF’s exclusive B-tube technology. CNC-machined brackets and quick-connect inlet/outlets. 100% aluminum.

909-355-1991
www.csfrace.com
PN: 8154

CSF Cooling Racing & High Performance
Toyota GR Supra (A90/91) and BMW G-Series Side Radiator

Two-row, 42mm ultra-high performance core with CSF’s exclusive B-tubes. Includes detachable rock guard. Drop-in fit with no modifications necessary. Sold individually (same part number for each side). Perfect complement to CSF’s other Supra/G-Series cooling products.

909-355-1991
www.csfrace.com
PN: 8179

CVF Racing
LS Wraptor Serpentine System Wide-Mount Roots-Style Supercharger

This Wraptor Serpentine System is designed and engineered around today’s popular roots-style supercharger drives and intakes. Configured in Alt only, Alt+PS, Alt+AC and Alt+PS+AC configurations. Available in polished, C3 ceramic clear, stealth black anodized or black diamond finishes.

651-356-8593
www.cvfracing.com
PN: LSXWBS-WRAPTOR-AC

CVF Racing
LS Wraptor Serpentine System Mid-Mount Roots-Style Supercharger

Designed and engineered around today’s popular roots-style supercharger drives and intakes. Narrow configuration geared more toward older roadster-style builds. Available in Alt only, Alt+PS, Alt+AC and Alt+PS+AC configurations. Choose polished, C3 ceramic, black anodized or black diamond finishes.

651-356-8593
www.cvfracing.com
PN: LSXMBS-WRAPTOR-AC

Dana Inc.
Spicer SPL Plus U-Joints

The company that invented the U-joint now offers another advancement: SPL Plus U-joints. Building on the superior design, lubrication and sealing package of Spicer Life Series (SPL) U-joints, SPL Plus U-joints feature upgraded grease, seal, seal guard and spacer material for premium performance in the most demanding environments.

800-621-8084
www.spicerparts.com

DeatschWerks Fuel Systems
X2-Series Subaru Module

Fits all ’08–’20 Subaru WRXs and STIs. Flows 700 lph at 40 psi. Supports 1,300–1,500 hp. Integrates seamlessly with OE surge bucket, wiring harness, level sender and feed lines. Fitment for dual DW300 or any other standard 39mm pump. Convertible between OE returnless and return-style (-8AN feed and -6AN return). Venturi-fed surge bucket.

405-217-0701
www.deatschwerks.com
PN: SEP-50

DashLogic
SensorTap IAT/Baro Relocation Module

Allows relocation of the IAT and/or Baro sensors on GM vehicles with a four-wire MAF. Now users can move their IAT further down the air tract for better accuracy when using water/meth injection or put it within the manifold for supercharged applications. Blow-through boosted setups can break out the Baro sensor as well.

801-709-6300
www.dashlogic.com
PN: STB75CL

DC Sports
DCS5534 Honda Accord Exhaust

Bolt on some aggressive sounds, increase performance and add some much-needed style with the all-new DC Sports 3 cat-back exhaust system for the ’18–’20 Honda Accord.

626-937-6988
www.dcsports.com
PN: DCS5534

53712_1.pdf

DC Sports
SCS4610 ‘19 Toyota Corolla Hatchback Exhaust

Made from 100% mandrel-bent T-304. Fully TIG-welded. Direct bolt-on fitment. Features 2.5-in., 16-gauge piping and 3-in. quad tips (single wall). Available in polished, black polished and burnt finish. Designed and tested in the U.S.A.

626-937-6988
www.dcsports.com
PN: SCS4610

“Five to six years ago, 500 hp was an insane amount of power. Nowadays, if you do not have 650-plus hp to the tires, you aren’t cool. LS/Coyote swaps are still trending very well, but we have also been noticing a wave of customers reverting back to big-blocks.”—Mike Wahl, National Sales and Marketing Manager, FiTech EFI

DC Sports
ABS5610 2016–2020 Honda Fit Axle-Back Exhaust

Axle-back system for the ’16–’20 Honda Fit is made from high-quality brushed mandrel-bent, 2.5-in. (63.5mm) T-304 stainless-steel piping. Matched with a race-inspired muffler and 3.5-in. tip, this kit will give users the look and sound that is sure to turn heads. All DC Sports exhaust systems are made to bolt directly to OEM.

626-937-6988
www.dcsports.com
PN: ABS5610

DC Sports
CSB5534 Honda Accord CS-1 Front Tower Bar

CS-1 front carbon strut bar.

626-937-6988
www.dcsports.com
PN: CSB5534

DeatschWerks Fuel Systems
X2-Series Camaro Module

Fits all ’10–’15 Camaros. Flows 650 lph at 40 psi, Supports 1,000–1,200 hp. Integrates seamlessly with the OE surge bucket, wiring harness, level sender and feed lines. Fitment for dual DW300 or any other standard 39mm pump. Convertible between OE returnless and return-style (-8AN feed and -6AN return). Venturi-fed surge bucket.

405-217-0701
www.deatschwerks.com
PN: SEP-01

DeatschWerks Fuel Systems
Fuel Cell Surge Tank

Supports up to four -6AN inlets. Single -6AN outlet. A 1/8-in. NPT. Supports up to 1,000 hp. Two-psi-per-turn precision ball-bearing adjustment. Multi-directional bracket and minimum footprint for maximum installation flexibility. Compatible with all fuels.

405-217-0701
www.deatschwerks.com
PN: 6-000-FCST

DeatschWerks Fuel Systems
Boost-A-Pump

Digital amplification technology. Intuitive click thumbwheel for on-the-fly programming. Password-protected lockout function. Rated for continuous use at 40 amps and 22 volts. Plug-and-play compatibility with DW brushless controllers.

405-217-0701
www.deatschwerks.com
PN: 9-BAP01

DeatschWerks Fuel Systems
DW650iL Brushless

650 lph at 40 psi. Supports 1,000–1,200 hp. Engineered for both inline and in-tank applications. Plug-and-play with DW
brushless controllers. 8AN ORB inlet and outlet. Compatible with all fuels, including E98 ethanol, diesel and methanol.

405-217-0701
www.deatschwerks.com
PN: 9-650

DeatschWerks Fuel Systems
Octane Boosters

Formulated to provide an octane boost of up to 100 RON (research octane number); 32 oz. treats up to 10 gal. Dyno proven to make more power than the competition. Allows for increased timing and boost pressure. Cleans fuel injectors. Improves throttle response and acceleration.

405-217-0701
www.deatschwerks.com
PN: 100R

DeatschWerks Fuel Systems
DWR1000c Compact Regulator

Supports up to 4 -6AN Inlets. Single -6AN outlet; 1/8-in. NPT. Supports up to 1,000 hp. Two-psi-per-turn precision ball-bearing adjustment. Multi-directional bracket and minimum footprint for maximum installation flexibility. Compatible with all fuels, including ethanol, methanol and diesel.

405-217-0701
www.deatschwerks.com
PN: 6-1002-FRB

Design Engineering Inc.
VW Beetle Firewall Insulation Kit

Custom cut for a direct fit, it replaces the heavy, fragile factory-style tar boards. Made from the company’s black floor and tunnel material, it provides superior heat and sound protection. Installs the same as the factory tar boards. Three-piece kit.

440-930-7940
www.designengineering.com
PN: 10046

Design Engineering Inc.
D-Mat 30mm Insulation and Sound Absorber

D-Mat 30mm is a universal, high-density, high-R-Value insulation material. Ideal for insulating vans, trucks and many other applications. Easy to cut and use. Comes in 82-in. width by the foot.

440-930-7940
www.designengineering.com
PN: 50413

Design Engineering Inc.
VW Beetle Pre-Cut Interior Heat and Sound Control Kit

Get a quiet ride with DEI sound, heat and damping kit for Beetles. It includes D-Mat insulation precut to fit the Beetle to give a cooler, quiet ride. Included in the kit is Boom Mat damping material. Fits standard ’50–’72 Beetles and ’71–’72 Super Beetles.

440-930-7940
www.designengineering.com
PN: 5510015

Design Engineering Inc.
Stainless-Steel Pipe Shield

Made from durable 304 stainless steel and preformed with a curved shape to fit most pipe sizes. Two layers of 304 stainless encapsulate a high-temperature insulation, allowing up to a 2,000ºF direct temperature rating. Standoffs 1/2-in. high provide an air gap to the pipe and make mounting easy with the provided stainless clamps. Two sizes available.

440-930-7740
www.designengineering.com
PN: 10254

Design Engineering Inc.
Stainless-Steel Pad Shield

Universal heat shield pads. Made from double-sided, high-grade stainless steel with silica insulation. Welded seams seal the insulation between the stainless steel, making for a durable, long-lasting shield. Grommet holes allow for easy mounting. Capable of 2,000ºF direct heat. Can be hand-formed to fit bends and curves. Available in two sizes.

440-930-7940
www.designengineering.com
PN: 10257

53081_1.jpg

Design Engineering Inc.
Mazda Miata Pre-Cut Interior Heat and Sound Control Kit

Pre-cut premium thermal insulating and sound absorbing under-carpet kit. Whether the padding is worn out or just needs an upgrade, DEI’s under-carpet kit is made from proven Under Carpet Lite material. At 1/2-in. thick, its engineered multilayer construction blocks heat and absorbs engine and road noise. For ’99–’05 Miatas.

440-930-7940
www.designengineering.com
PN: 50295

Design Engineering Inc.
Sound Barrier

DEI Sound Barrier is a combination of a .75-lb.-ft. two-mass loaded barrier with a 1/2-in. non-woven sound-absorbing material lamination. One product provides vibration damping, sound control and heat blocking. Meets FAR 25.853 and Reach standards. Can be glued, mechanically fastened or laid under carpet. Sold 55 in. wide by the linear yard.

440-930-7940
www.designengineering.com
PN: 11019

Design Engineering Inc.
Sprint-Car Engine Cover

Warm up the engine faster and keep heat in while waiting for the next heat race. Designed with tough PVC-coated polyester fabric with glass-mat insulation and fiberglass-lined wings. The fiberglass-lined wings will not melt when touching a hot exhaust, and built-in snaps hold the wings in the up position to allow servicing on the engine.

440-930-7940
www.designengineering.com
PN: 10225

Design Engineering Inc.
Black Floor and Tunnel Shield

Axle-back system for the ’16–’20 Honda Fit is made from high-quality, brushed, mandrel-bent, 2.5-in. (63.5mm) T-304 stainless-steel piping. Matched with a race-inspired muffler and a 3.5-in. tip, the kit will give users the look and sound that is sure to turn heads. All DC Sports exhaust systems are made to bolt directly to all OEMs.

440-930-7940
www.designengineering.com
PN: 50549

Design Engineering Inc.
Heel Protector

The floor, firewall and transmission tunnel can get unbearably hot during a race. Users can get uncomfortable and even burned. DEI Heal Protector solves that problem with insulated easy-on/easy-off protection that blocks the heat and keeps the user cooler the entire race. A sewn-in wear surface helps the DEI Heal Protector last race after race.

440-930-7940
www.designengineering.com
PN: 11015

Detroit Speed Inc.
Mini-Tubs for ’79–’93 Fox Body Mustangs and ’79–’86 Capris

The mini-tubs are inner wheel housings designed to accommodate wider tire and wheel packages, including tires as wide as 315 mm, without rolling, flaring or framerail modifications. Laser trim provides extra material if more depth is desired. The required seatbelt relocation bracket and hardware are also included to retain factory rear seats.

704-662-3272
www.detroitspeed.com
PN: 40406

Detroit Speed Inc.
Upper Torque Box Reinforcement Kit for ’79–’93 Fox Body Mustangs

An effective bolt-on solution that improves the rigidity of the torque box, prevents damage to the chassis and improves the safety of the vehicle. It ties the link pockets into the frame and floor pan on both sides and connects the two boxes side to side with a telescoping feature.

704-662-3272
www.detroitspeed.com
PN: 10115

Eaton Performance Products
Mustang S550 Detroit Truetrac

The legendary Detroit Truetrac limited-slip differential is now available for ’15–current S550 Mustangs (excluding GT350). Smooth and automatic, the high-bias pre-load system enhances aggressive on-road performance, limits wheel spin, and maximizes traction for optimal acceleration.

800-328-3850
www.eatonperformance.com
PN: 917A731

Detroit Speed Inc.
Subframe Connectors for ’79–’93 Fox Body Mustangs and ’79–’86 Capris

Designed to give maximum torsional stiffness connecting the front and rear framerails. Fixes multiple issues within that single component by reinforcing the lower link pocket and strengthening the rear torque box. The integrated front seat-mounting brackets are stronger than factory and fit stock mountings.

704-662-3272
www.detroitspeed.com
PN: 10114

Detroit Speed Inc.
Rear Suspension for ’79–’93 Fox Body Mustangs and ’79–’86 Capris

The Detroit Speed Fox Body Rear Suspension Kit improves suspension geometry, ride quality and driving characteristics. It includes the rear coil-over conversion, swivel link, rear sway bar and adjustable track bar kits. The driver can expect improved traction, more stability and lower driveline vibrations, lending more confidence for spirited driving.

704-662-3272
www.detroitspeed.com
PN: 41647

DTE Systems
PedalBox+

DTE Systems says that the PedalBox+ is the most advanced throttle response controller on the market today. With four modes and 21 levels of throttle-sensitivity adjustment, the PedalBox allows users to crush that lag when stepping on the throttle. With app control and Perfectune, users can be sure the PedalBox is programmed specifically for their vehicle.

805-813-9801
www.chiptuning.com/us

“The auto/truck aftermarket in general is thriving more than ever, as most may now have the time to work on projects that may have been postponed for years.

Saving money on gas and commute time may also have something to do with it. Vortech continues to feel that there is a strong need for American manufacturing, and many returning and new customers want to support those companies that have kept it stateside.”—Jimmy Martz, Sales and Marketing Director, Vortech Superchargers

DTE Systems
PowerControl RX

DTE Systems says that PowerControl RX is the most advanced performance piggyback tune. The RX optimizes sports cars such as Porsche, Ferrari and Audi RS, to name but a few. The RX has extended multi-channel and multi-protocol technologies, with specialized tuning algorithms suitable for all high-performance engines, including twin turbos, bi-turbos and hybrids.

805-813-9801
www.chiptuning.com/us

Dyme PSI
Rattlesnake Hose Design Tool Kit

The Rattlesnake Hose Design Tool Kit is an easy-to-use system to help users design, order and receive a crimped, fully tested, high-performance hose assembly. No catalogs, no mistakes, no leftovers and no stress. Dyme PSI provides a complete range of replicas of its hoses and fittings that users can prototype exactly what’s needed, and Dyme PSI sends the real part. Easy.

909-267-8742
www.dymepsi.com
PN: RSTK10

Edelbrock Group
Comp Cams HRT Cam Packages for Turbo & Supercharged Dodge Gen III Hemi Engines

Kits contain all components needed for a complete valvetrain upgrade while the low shock technology lobes reduce valvetrain shock and improve durability.

901-795-2400
www.compcams.com
PN: MK201-330-17

Edelbrock Group
Black Oxide 3/8-in. 16x3/4-in. Header Bolt Kit With Tool

This header bolt kit comes in a package of 12 bolts. The kit includes an Allen socket to aid in installation. M80-1.25x25mm and
3/8-in. 16x1-in. black oxide header bolt kits are also available.

310-781-2222
www.edelbrock.com
PN: 8540

Edelbrock Group
Comp Cams LST Blower Camshaft Packages for GM LS Engines

Comp Cams adds complete cam packages for GM LS blower applications to its popular Low Shock Technology cam series that’s optimized for high-rpm power production and boost response. Spintron and dyno tested to ensure maximum power, boost response and reliability.

901-795-2400
www.compcams.com
PN: MK54-335-11

Edelbrock Group
Comp Cams LST Stage 2 Turbo Camshaft Packages for GM LS 4.8L Engines

Comp Cams adds complete cam packages for GM LS 4.8L turbo applications to its popular Low Shock Technology cam series that’s optimized for high-rpm power production and boost response.

901-795-2400
www.compcams.com
PN: MK54-331-58

Edelbrock Group
Comp Cams Sportsman .904-in. Solid Roller Lifters for GM LS Engines

Adds larger .904-in. Sportsman solid roller lifters for GM LS engines featuring .800-in.-diameter wheels and precision sorted needle bearings for ultimate durability. Staked axles eliminate clips and provide robust axle retention. Triple oiling system with consistent roller and axle lubrication.

901-795-2400
www.compcams.com
PN: 96958-16

Edelbrock Group
Comp Cams Race XD .904-in. Bushed Solid Roller Lifters for GM LS Engines

Strong, durable and versatile roller lifters available for GM LS engines. A proprietary bronze-alloy roller wheel bushing provides superior durability in extreme operating conditions. Interchangeable pushrod seats are available in .090-in. or .180-in. offsets.

901-795-2400
www.compcams.com
PN: 99958-16

Edelbrock Group
Comp Cams LST Camshafts for GM 6.6L Duramax Diesel Engines

Comp Cams expands its GM 6.6L Duramax diesel camshaft selection for ’01–’05 (LB7/LLY) and ’06–’16 (LBZ/LMM/LML/L5P) applications with the addition of Low Shock Technology lobes in order to create greater power potential and increased valvetrain durability.

901-795-2400
www.compcams.com
PN: 132-300-13

Edelbrock Group
Comp Cams Performance Lash Adjusters for Ford Modular 4.6L/5.4L Engines

Transfers more lift and duration to the valves while also improving valvetrain stability and high-rpm durability. Engineered to have a slower leak-down rate, they provide more lift and duration when aggressive performance camshafts and heavy-duty valve springs are installed.

901-795-2400
www.compcams.com
PN: 84031-32

Edelbrock Group
Comp Cams .585-in.-Lift Beehive Valve Spring Kits for GM 6.6L Duramax Diesel Engines

Comp Cams .585-in.-lift Beehive valve spring kits for GM 6.6L Duramax Diesel ’01–’05 (LB7/LLY) and ’06–’16 (LBZ/LMM/LML/L5P) applications are now available to ensure valvetrain control under high boost conditions.

901-795-2400
www.compcams.com
PN: 26125BC-kit

Edelbrock Group
Comp Cams Hi-Tech Pushrod Sets for ’01–’16 GM 6.6L Duramax Diesel Engines

Increase valvetrain stability with these 7/16-in.-diameter pushrods. The 9.430-in. standard length with ends that match the OEM design are compatible with stock or upgraded valvetrain components. The .120-in. wall thickness maintains valvetrain stability at higher rpm and under higher boost pressures.

901-795-2400
www.compcams.com
PN: 8779-16

“It seems that the biggest change in the racing and performance market over the last couple of years has been the use of increasingly complex technology. That can be everything from innovative new composite materials to high-pressure fuel systems to unbelievably complicated in-vehicle computer systems.

Other potential changes and challenges that can also bring opportunities for growth include shifts to electrification and automation. We have a positive outlook for the coming year and are excited to explore new business opportunities.”—Edward Xu, Director of Marketing, HP Tuners

Edelbrock Group
Comp Cams LST Camshafts for Ford 6.0L/6.4L Power Strokes

Comp Cams LST camshaft series brings Comp’s powerful Low Shock Technology lobe designs to Ford 6.0L/6.4L ’03–’10 Power Stroke engines. The premium steel billet cams unlock the potential for big power and torque gains, while the camshaft profiles are also easier on the valve springs, enhancing durability and reducing load loss.

901-795-2400
www.compcams.com
PN: 435-300-13

Edelbrock Group
Comp Cams .515-in.-Lift Valve Spring Kits for Ford 6.0L/6.4L Power Stroke Engines

Comp Cams introduces a premium valve spring kit for Ford 6.0L/6.4L Power Stroke engines. The kit handles aggressive cams up to .515-in. lift and much higher boost pressures and rpm than factory valve springs. The kit includes valve springs, seals and shims while using the stock retainers.

901-795-2400
www.compcams.com
PN: 26124-KIT

Edelbrock Group
FAST 102mm Big Mouth Throttle Body in Black

Designed to maximize performance upgrades on all GM Gen III and Gen IV engines with cable-driven throttle bodies, the FAST 102mm Big Mouth throttle body is now available with an anodized black finish. The offset blade pivot improves throttle response, and the beefed-up linkage with dual throttle spring mechanism ensures total control.

901-260-3278
www.fuelairspark.com
PN: 54106

Edelbrock Group
Comp Cams Hi-Tech Pushrod Sets for ’03–’10 Ford 6.0/6.4L Power Stroke Engines

Increase valvetrain stability for more power and durability with these 11/32-in.-diameter pushrods from Comp Cams. The 9.795-in. length works in both Ford 6.0L and 6.4L Power Stroke engines. The .120-in. wall thickness maintains valvetrain stability at higher rpm and under higher boost pressures.

901-795-2400
www.compcams.com
PN: 8786-16

Edelbrock Group
FAST EZ-EFI -6AN Fuel Return Line Fitting

Easily add a return fuel line port to a fuel tank with the EZ-EFI -6AN return fuel line fitting from FAST. This kit is compatible with any tank material up to 1/4-in. thick. It can also be used for oil return, power steering line return, vent, etc.

901-260-3278
www.fuelairspark.com
PN: 307031

Edelbrock Group
FAST Supercharger and Cam Power Packages for GM LS Engines

A combination Edelbrock supercharger and a Comp Cams valvetrain Cam kit for Dodge Gen III Hemi and GM LS engines. The kits include a supercharger, two different size pulleys, drive accessory pulleys, fuel lines and rails, camshaft, pushrods, valve springs, retainers, locks, seals and seats.

901-260-3278
www.fuelairspark.com
PN: 303011

Edelbrock Group
TCI SFI 29.1 Flexplate for Dodge Gen III Hemi Engines

The new Gen III Hemi flexplate from TCI is SFI 29.1 certified, making it the perfect upgrade for a high-horsepower street or competition drag car. The chromoly steel design, double-welded ring gear and 50% thicker center section add strength and rigidity. SFI 29.1 certification meets major race sanctioning body safety requirements.

662-224-8972
www.tciauto.com
PN: 145210

Edelbrock Group
RHS Pro Elite CNC-Port Six-Bolt Cylinder Heads for GM LS3 Engines

A premium LS3 performance head, ensuring great power on high-horsepower and boosted engine builds. CNC-machined intake and exhaust runners as well as combustion chambers increase flow capability. The .700-in.-thick deck make these ideal for high-horsepower and boosted applications.

901-259-1134
www.racingheadservice.com
PN: 54550

Edelbrock Group
Supercharger Kit for ’19–’20 GM Gen VI 5.3L–6.2L Trucks V8 Engines

This 50-state emissions-legal supercharger system utilizes the largest Eaton rotor group, the R2650 TVS, a 170-degree high-twist
lobe design that can accommodate bigger power builds with unparalleled efficiency and reliability. An increase in horsepower
and torque is gained with almost no loss in fuel efficiency.

310-781-2222
www.edelbrock.com
PN: 15665

Edelbrock Group
Powerhouse Retainer Degree Gauge Tool

Quickly and easily identify the valve retainer degree to avoid mismatching parts that could lead to disastrous valve failure. Manufactured in the U.S.A. from high-quality aluminum. Anodized and laser etched for durability and visibility.

901-260-8256
www.powerhouseproducts.com
PN: POW352005

Edelbrock Group
Stage 2 Supercharger Kit for ’18–’19 Ford Mustang GT 5.0L V8 Engines

The new 50-state emissions-legal Stage 2 supercharger utilizes the high-efficiency Eaton R2650 TVS rotor assembly with a high-twist lobe design, along with bigger bearings and beefier timing gears to deliver an ultra-smooth and linear torque curve with more usable performance at all points in the power band.

310-781-2222
www.edelbrock.com
PN: 15388

Edelbrock Group
Stage 2 Supercharger Kit for ’15–’17 Ford Mustang GT 5.0L Coyote V8 Engines

The new 50-state emissions-legal Stage 2 supercharger that utilizes the high-efficiency Eaton R2650 TVS rotor assembly with a high-twist lobe design, along with bigger bearings and beefier timing gears to deliver an ultra-smooth and linear torque curve with more usable performance at all points in the power band.

310-781-2222
www.edelbrock.com
PN: 15839

Edelbrock Group
Performer RPM Cylinder Heads for Oldsmobile Big-Block V8 Engines

Features a modern 77cc combustion chamber, larger intake valves and refined bowl blending for improved flow characteristics. This cylinder head is a modern refinement to the 6051 head and is intended for installation on ’65–’76 big-block 400–455ci Oldsmobile engines with a 10.625-in. deck height.

310-781-2222
www.edelbrock.com
PN: 61025

eFlexFuel
Flexfuel Conversion Kit

The eFlexEco kit is for drivers looking to get the most out of their engines while reducing their carbon footprint. Cut down on emissions with high-octane E85 fuel. Ethanol sensor for optimal performance with any mixture of E85 and traditional gasoline. Sustainable driving with eFlexEco. For four-, six- and eight-cylinder engines.

+358(0)40-7685313
www.eflexfuel.us
PN: EFLEX ECO

eFlexFuel
eFlexPro Tunable Flexfuel Conversion Kit

The eFlexPro is for auto enthusiasts and professionals. Everything that exists with the eFlexEco and eFlexPlus products can be found here. Said to be the first-ever flex-fuel convertor with fully customizable fuel maps (patent pending), one that can be connected to two external engines. Optimize a vehicle as desired.

+358(0)40-7685313
www.eflexfuel.us
PN: EFLEX PRO

eFlexFuel
eFlexPlus Flexfuel Conversion Kit

The eFlexPlus kit is for drivers who aren’t tuning pros but want better performance out of their vehicles. eFlexPlus provides an easy avenue for basic engine optimization with access to a more sophisticated version of
the eFlexApp and eFlexTuner software. For four-, six- and eight-cylinder gas engines.

+358(0)40-7685313
www.eflexfuel.us
PN: EFLEX PLUS

Eibach
Load-Leveling-System

Eibach

800-507-2338
www.eibach.com/us

Eibach
Pro-Truck-Coil-Over 2.0

Eibach

800-507-2338
www.eibach.com/us

Eibach
Pro-Lift-Kit HD

Eibach

800-507-2338
www.eibach.com/us

Eibach
Pro-Spacer Wheel Spacers

Eibach

800-507-2338
www.eibach.com/us

Eibach
Pro-Plus Spring and Stabilizer Bars

Eibach

800-507-2338
www.eibach.com/us

Energizer Holdings
STP Ceramic Oil Treatment

STP Ceramic Oil Treatment protective coating improves lubricity, reduces frictional force, cleans and prevents sludge and deposit buildup, extends engine life and improves fuel efficiency. To use, just pour in the 15-oz. bottle of STP Ceramic Oil Treatment at or in between each oil change.

678-459-8873
www.stp.com
PN: 19387

Ercolina-CML USA Inc.
HB60 Hot Shot

Ercolina’s HB60 Hot Shot bender is ideal for producing tight-radius, consistent-quality bends in pipe, tube, squares, solids and
other profiles. Mild steel tube capacity: 21/2 in. Hybrid hydraulic gear-driven rotary draw bend action bends to CLR as small as 2-D. Bend to 180 degrees in seconds with patented ergonomic function. No ratcheting or repositioning.

563-391-7700
www.ercolina-usa.com
PN: HB60

ETL Performance Products
Universal Intercooler

ETL Performance Products specializes in performance aftermarket universal intercooler cores. The company says that its attention to detail is what really separates it from its competitors in the market today. It uses only the finest materials in its manufacturing process to complement the innovative engineering that goes into each unit produced.

234-575-7226
PN: 241005BKC

FI New Power
SFI Billet Flexplate

SFI 29.2- and 29.3-approved billet flexplate.

+86-13969871486
www.etlperformanceproducts.com
PN: LS

FI New Power
SFI Transmission Powerglide Case

SFI-approved heavy-duty case for racing performance.

+86-13969871486
www.etlperformanceproducts.com
PN: PG20

FiTech Fuel Injection
Go Fuel Double Pump 1,600hp Fuel Cell Module

The Go Fuel Double Pump is a high-horsepower pump module that will retrofit into a 12-bolt flange fuel cell. It features dual 340-lph, high-pressure, E85-compatible fuel pumps to support engines with up to 1,600 hp when running gasoline. The module offers -8 AN fittings for feed and return as well as independent power terminals.

951-340-2624
www.fitechefi.com
PN: 50020

FiTech Fuel Injection
Go Shift AODE/4R70W

FiTech’s new Go-Shift electronic transmission control for Ford AODE and 4R70W transmissions. To upgrade a transmission to an electronic overdrive version, the user will need a controller to unleash the adjustability of shift points, shift firmness and torque converter lockup. It also comes preprogrammed straight out of the box.

951-340-2624
www.fitechefi.com
PN: 2011

FiTech Fuel Injection
Nemesis EFI 4500

Introducing the Nemesis by FiTech. The next level in throttle-body fuel injection systems with a 4500 flange and interchangeable and tunable annular discharge rings. Get the best in air flow and drivability with the Nemesis. Featuring dual TPS, dual IAC motors, -8AN fuel inlets, and more for ultimate control on engines up to 1,600 hp.

951-340-2624
www.fitechefi.com
PN: 30070

FiTech Fuel Injection
Ultimate LS 1,000 hp

The next level up in the Ultimate LS line is 1,000 hp. Now including 80-lb. injectors to unleash more horsepower support to an LS. All 1,000hp kits include dual oxygen sensors and a fuel pressure regulator standard. Available for LS1, LS3, LS7 and similar engines, with or without transmission control for 4L60E and 4L80E.

951-340-2624
www.fitechefi.com
PN: 70030

FiTech Fuel Injection
Force Fuel Mini

The all-new FiTech Mini Force Fuel system makes the upgrade to fuel injection easier than ever. The Mini Force Fuel is more
compact for more versatile mounting on frame rails and tight spaces. It simply connects to a stock mechanical or electric
fuel pump, then supplies the EFI system with high pressure through the use of an internal 340-lph pump.

951-340-2624
www.fitechefi.com
PN: 50006

FiTech Fuel Injection
Retro LS Port Injection

The Retro LS Port system bridges the gap between port injection and a carburetor look on LS engines. Providing a realistic carburetor-style throttle body with the benefits of sequential fuel injection, the kit includes an intake, fuel rails, injectors, a throttle body, an ECU, a harness, sensors and more. Throttle bodies available in both black and gold.

951-340-2624
www.fitechefi.com
PN: 37002

FiTech Fuel Injection
GM LT1 Standalone EFI System

Bring an old GM TPI-controlled engine (L98, LB9) to modern times. FiTech offers a new GM TPI standalone EFI system. This kit plugs into all existing sensors on a GM TPI engine and provides complete control of the engine. From timing control to self-learning fueling, this kit brings new lift into the GM TPI engine.

951-340-2624
www.fitechefi.com
PN: 38350

FiTech Fuel Injection
Go Fuel Regulated With Fill Cap

The Go Fuel regulated pump module will retrofit into a 12-bolt flange fuel cell. It features a 340-lph, high-pressure, E85-compatible fuel pump and is pre-regulated to 58 psi to support engines with up to 800 hp when running gasoline. The module
offers -6 AN fittings for feed and return.

951-340-2624
www.fitechefi.com
PN: 50019

Fluidampr
Competition-Series Cummins 5.9L/6.7L Common Rail

Professional truck pullers and drag racers who push the limits demand a Fluidampr for all-out competition. The new Competition-series damper for Cummins 5.9L/6.7L common rail engines delivers. SFI 18.1 spec. Made in the U.S.A.

716-592-1000
www.fluidampr.com
PN: 980301

Fluidampr
Toyota 2JZ Engine Damper Revision

Fluidampr announces a revision to its popular performance damper for the Toyota 2JZ engine. The accessory-drive pulley is now interchangeable. The added flexibility allows owners to make future engine modifications without the need to purchase a new damper.

716-592-1000
www.fluidampr.com
PN: 840801

Ford Motor Company
Oil Filter Adaptor for Pushrod Engines

New machined billet-aluminum design. Attractive blue-anodized finish. Improved flow over the M-6880-A50 casting. Adaptor screws onto original oil filter location and allows rotation of filter to provide clearance for engine swaps and chassis modifications. Fits most Ford small- and big-block pushrod engines with 3/4-16 thread filter mount.

313-269-8853
www.performanceparts.ford.com
PN: M-6880-B50

Fluidampr
Tractor Pulling—Universal Fit for Taper Lock Hub

Tractor-pulling engine builders long favored Fluidampr’s parent company Vibratech TVD heavy-duty dampers. Fluidampr takes it further with 35 years of developing dampers for professional motorsports. The result is exceptional long-lasting crankshaft vibration control for today’s top pro pullers.

716-592-1000
www.fluidampr.com
PN: 1243101

Ford Motor Company
’19–’20 Ranger EcoBoost Power Pack Performance Calibration

Ford Performance calibration for ’19–’20 Ranger EcoBoost. The Ford Performance-engineered performance calibration is a 50-state-legal calibration for the ’19–’20 Ford Ranger. It increases power and improves drivability throughout the rpm range. Horsepower gain: 45 hp @ 4,500 rpm. Torque gain: 60 lb.-ft. @ 2,500 rpm.

313-269-8853
www.performanceparts.ford.com
PN: M-9603-REB

Forgeline Motorsports
15-in. Bead-Lock Drag Wheel

After Forgeline Motorsports launched an incredibly successful line of forged monoblock bead-lock wheels at the 2019 PRI Trade Show, many serious straight-line racers asked for a 15-in version. Today, that request has become a reality with the new 15x10 GS1R and CF1R forged monoblock single bead-lock wheel.

800-886-0093
www.forgeline.com
PN: 15-INCH BEADLOCK

FTI Performance
ESB Series 3200 Stall Billet Street Converter

866-726-8358
www.ftiperformance.com

Fupower Co. Ltd.
Custom Silicone Tubes

Custom silicone tubes based on the user’s drawing or sample.

+86-18721636174
www.fupower.com

GFB Go Fast Bits
VTA Blow-Off Valve for the Ford F-150

+612-95340099
www.gofastbits.com

Fupower Co. Ltd.
Custom Silicone Tubes

Custom-build silicone hose for ATV/UTV/motorcycle.

+86-18721636174
www.fupower.com

GFB Go Fast Bits
DV+ Diverter Valve for the Ford Ranger

The DV+ is a complete performance diverter valve solution for the Ford Ranger 2.3 EcoBoost. The Ranger’s factory diverter valve is made from plastic, which subsequently results in boost leaks and limited operational life. The DV+ solves all weaknesses of the factory diverter and improves its performance while retaining ECU control.

+612-95340099
www.gofastbits.com
PN: T9365

GFB Go Fast Bits
DV+ Diverter Valve for the GM LTG

The DV+ is a complete performance diverter valve solution for the GM 2.0 LTG engine. The factory diverter valve on the LTG engine is made from plastic, which subsequently results in boost leaks and limited operational life. The DV+ solves all weaknesses of the factory diverter and improves its performance while retaining ECU control.

+612-95340099
www.gofastbits.com
PN: T9363

GFB Go Fast Bits
VTA Blow-Off Valve for the Ford F-150

+612-95340099
www.gofastbits.com

GFB Go Fast Bits
VTA Blow-Off Valve for the Ford Ranger

Although the VTA might look like a blow-off spacer, it’s not. It’s a complete, electronically controlled, atmosphere-venting blow-off valve solution designed to replace the OEM diverter valve on the Ford Ranger. The VTA offers a performance and longevity improvement over the factory diverter while delivering a distinctive turbo blow-off sound.

+612-95340099
www.gofastbits.com
PN: T9465

Hedman Performance Group
Billet-Aluminum Universal-Fit LS Engine Mount Kit

The CNC brackets bolt directly to the LS engine block’s factory mounting location. The kit includes mounting plates, polyurethane bushings, stainless mounting hardware and connector bolts as well as a pair of steel starter tabs that allow the installer to adapt the kit to work in virtually any application.

562-921-0404 x202
www.hedman.com
PN: 4533

Hedman Performance Group
Swap-in-a-Box LS Into ’70–’81 Camaro or Firebird (Stainless Steel)

Components are designed to work together to securely install an LS engine into a ’70–’81 Chevy Camaro or Pontiac Firebird with a floor-shift manual transmission. Includes headers from Hedman Hedders, engine mounts and transmission crossmember from Trans-Dapt, and an LS-swap oil pan from Hamburger’s.

562-921-0404 x202
www.hedman.com
PN: 42224

Hot Shot’s Secret
FR3

FR3 friction reducer is a lubricity-enhancing oil additive that increases the lubricating and wear-reduction properties of the host oil. The product contains three proprietary synthetic lubricants that have unique lubricating properties even compared to PAO or mPAO synthetics of the same viscosity.

800-341-6516
www.hotshotsecret.com
PN: HSSFR332Z

Hot Shot’s Secret
Everyday Diesel Treatment

One treatment of EDT with each fill-up will keep a diesel powering down the road. This concentrated cetane improver upgrades power and performance in all diesel equipment, increasing fuel and maintenance economy. The stability of fuels will be greatly increased, and diesel engines will be kept in a much cleaner, more maintenance-free condition.

800-341-6516
www.hotshotsecret.com
PN: HSSEDT16ZSP

Hot Shot’s Secret
Adrenaline R-Series Trans, Oil and Gear

The formulas are 100% pure synthetic, using only Group IV base oils. Racing transmission fluid was formulated for high-horsepower, high-torque racing applications. The formulas are based on 100% poly-alpha-olefin (PAO) Group IV and high-quality Group V synthetic oils.

800-341-6516
www.hotshotsecret.com
PN: R501G

Horsepower Tuners
Neural Network Trainer by Horsepower Tuners

www.horsepowertuners.com

Hypertech
Max Energy Spectrum Power Programmer

Full-color, 4.3-in. daylight-readable color screen with bold contemporary styling. All calibrations included have been issued CARB EO numbers along with consolidation coverage of most GM and Ford applications. Product update to accommodate a fast programming experience with user-friendly features. Tunes optimized for maximum performance.

901-385-1888
www.hypertech.com
PN: 3050

HushMat & ZyCoat
ZyBar One-Stop Coating Service

ZyBar one-stop shop for racing industry offers a seamless, one-stop process for coating headers, turbos, exhaust manifolds and intakes. Visit ZyCoat.com/Coating-services and select the components, place an order, and ZyCoat ships the box and return shipping label. In 15 days, the coated and cured components are shipped back to the user.

913-599-2600
www.zycoat.com

iMohr Technic & Design
VW Beetle Double-A-Arm Front Suspension—Top Model

Front double-A-arm suspension for the Beetle (Type 1). Delivers sporty and comfortable handling, with rack-and-pinion steering (fully adjustable) and triangular arms. Adjustments of height, toe, camber and caster. Simple installation bolts on in the front head plate. With coil-overs, strut bar and spindles. Sportivity, comfort and safety for the car.

+55-54-3329-5930
www.imohr.com.br
PN: SDI-VWTOP

iMohr Technic & Design
VW Beetle Sport Pedal Assembly

Special pedals made from steel and CNC-machined for use in stock accent. Uses standard clutch and throttle cable system. This is not a kit; the user needs to use his/her own standard alloy base, clutch axle, brake spring and link and throttle link and roller. Extra large for better sport use. Drilling required. Bolts, washers and hex nuts included.

+55-54-3329-5930
www.imohr.com.br
PN: P-VW

iMohr Technic & Design
VW Beetle Double-A-Arm Rear Suspension

Fully independent to use with CV joint. (such as the IRS Beetle system). Adjust camber and toe with the wishbone and spring load in the coil-over spring. Stock Beetle-style transmission mount. Go fast and comfortable with this double-wishbone iMohr suspension. No chassis cutting; no welding.

+55-54-3329-5930
www.imohr.com.br
PN: SDAT-VWB

iMohr Technic & Design
VW Bus Double-A-Arm Front Suspension

Front double-A-arm suspension for VW bus. Designed to deliver sporty and comfortable handling with rack-and-pinion steering and fully adjustable arms. Adjustments of height, toe and camber. Bolt-on in the front head plate. Uses OEM spindles and disc brakes with a ball-joint fitter (included). Four adjustable positions. Sportivity, comfort and safety.

+55-54-3329-5930
www.imohr.com.br
PN: SDI-VWK

Intercomp Racing
Billet-Aluminum Scale Pad Leveler

Intercomp’s billet scale pad leveler is CNC-machined from 6061-T6 aluminum for maximum rigidity while remaining tough, portable and user-friendly. These ultra-low deflection levelers are ideal for use with precision the Microflex scale system but can accommodate most 15x15-in. (381x381 mm) scale pads for motorsport.

800-328-3336
www.intercompracing.com
PN: 171010

Intercomp Racing
RFX Wireless Billet-Aluminum Corner Balancing Scales With Bluetooth

Intercomp RFX wireless scale systems feature the added ability to turn a mobile device into a second wireless indicator, utilizing secure Bluetooth technology. Communication between the indicator and scale pads continue to utilize the encrypted, field-proven RFX wireless weighing technology.

800-328-3336
www.intercompracing.com
50574_1.png

Intercomp Racing
RFX Wireless Load Stick

Intercomp says that its RFX wireless load stick is the first load stick in the industry where there is no need to worry about an indicator cable getting in the way or being damaged. Wireless load sticks feature three different body sizes, allowing for shock spacing from 15–25.25 in. (381–641 mm) and are available as single-, double-, and four-piece systems.

800-328-3336
www.intercompracing.com

JET Performance Products
Carburetor

A Stage 2 carburetor has all of the features of a Stage 1, plus it features fully recalibrated idle, off idle, main, accelerator pump and high-speed circuits to match any modifications done to the engine, such as intake manifold, headers, ignition or a mild cam change.

800-538-2447
www.jetchip.com
PN: 35002

JET Performance Products
Powr-Flow Throttle Body

The JET Powr-Flo throttle body is a direct replacement for the factory unit. It can be used to replace a worn-out throttle body or to upgrade the existing throttle body. The JET Powr-Flo throttle body provides increased air flow for improved throttle response by taking advantage of Jet’s unique inlet design.

800-538-2447
www.jetchip.com
PN: 76108

JET Performance Products
Xcelerator Throttle Tuner

JET’s Xcelerator throttle tuner enhances throttle response. No more throttle lag. Multiple performance settings so the user can adjust the throttle response for the driving style or upgrades. Also features a valet setting that restricts throttle response and a security setting that removes the throttle signal altogether.

800-538-2447
www.jetchip.com
PN: 40117

JET Performance Products
Performance Module

The JET Performance Module for Dodge, Chrysler and Jeep vehicles provides power gains across the entire power band, not just at full throttle. Point-by-point air/fuel ratio, ignition advance and various other tuning points provide performance gains of up to 25 hp.

800-538-2447
www.jetchip.com
PN: 91204

JET Performance Products
MAF Sensor

The JET Powr-Flo mass air sensor delivers improved horsepower, torque and mileage from cars, trucks or SUVs by simply replacing the restrictive stock mass air sensor. The flow-bench-tested design of the JET mass air sensor provides airflow increases of up to 45% and installs in 10 min. or less.

800-538-2447
www.jetchip.com
PN: 69147

K&N Engineering Inc.
Replacement Air Filter for ’19–’20 Toyota Corolla

K&N’s washable, reusable, high-flow air filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve air flow and capture contaminants, and they are designed to provide an increase in horsepower.

800-858-3333
www.knfilters.com
PN: 33-3154

K&N Engineering Inc.
Performance Air-Intake System for ’16–’19 Chevrolet Camaro SS

K&N’s easy-to-install air-intake systems replace the restrictive factory intake, allowing for virtually unrestricted air flow. This power-gaining air intake comes with K&N’s famous million-mile limited warranty.

800-858-3333
www.knfilters.com
PN: 57-3092

K&N Engineering Inc.
Replacement Air Filter for ’20 BMW M550i/750i

800-858-3333
www.knfilters.com
PN: 33-3155

K&N Engineering Inc.
Replacement Air Filter for ’20 Hyundai Venue

800-858-3333
www.knfilters.com
PN: 33-5103

KW Suspensions/ST Suspensions/Belltech
ST XTA Plus 3 Performance Coil-Overs

New ST XTA Plus 3 coil-over with three-way adjustable KW dampers, race springs, and aluminum uniball top-mounts. With 24 clicks of adjustment for each high-speed and low-speed compression damping and 18 clicks of rebound adjustment, the suspension knows no limits.

800-445-3767
www.stsuspensions.com
PN: 182028080N

K&N Engineering Inc.
Replacement Air Filter for ’18–’20 Hyundai i30N/Veloster N

800-858-3333
www.knfilters.com
PN: E-0642

KW Suspensions/ST Suspensions/Belltech
’15–’20 Ford F-150 Performance Handling Kit

Combining damping adjustable coil-overs and rear shocks with proven lowering components in one package. Kits contain height-adjustable coil-overs, shock absorbers, sway bar and lowering components to provide a vast improvement over OEM in overall performance while still retaining a comfortable ride quality.

800-445-3767
www.belltech.com
PN: 1008HKP

KW Suspensions/ST Suspensions/Belltech
’15–’20 Ford F-150 2WD 2-in. Drop Spindle

Achieve the desired 2-in. drop without negatively affecting the front-end suspension. Powdercoated high-strength ductile iron
castings are CNC machined. Belltech drop spindles are designed as a direct bolt-on solution for the Ford F-150 2WD.

800-445-3767
www.belltech.com
PN: 2352

KW Suspensions/ST Suspensions/Belltech
Variant 5 High-Performance Four-Way Adjustable Coil-Overs

A four-way, mass-production performance coil-over system. The Variant 5 features solid piston technology, including four-way adjustability with high- and low-speed compression and rebound. KW Suspensions says that it’s the only damper of its kind to feature all five features.

800-445-3767
www.kwsuspensions.com
PN: 30961031

KW Suspensions/ST Suspensions/Belltech
Variant 5 High-Performance Four-Way Adjustable Coil-Overs

800-445-3767
www.kwsuspensions.com
PN: 30961032

Leed Brakes
MOPAR Disc Brake Kits for Factory Power Brake Cars

716-852-2139
www.leedbrakes.com

KW Suspensions/ST Suspensions/Belltech
ST XTA Plus 3 Performance Coil-Overs

800-445-3767
www.stsuspensions.com
PN: 1820220821

Liqui Moly
DI Jectron

DI Jectron is a gasoline fuel-injection system additive designed for modern four-stroke gasoline direct-injection engines. Using PEA technology, it cleans the entire fuel system and lowers the risk of costly engine damage caused by low speed pre-ignition. It targets carbon buildup in the injector and around the outside of the tip.

888-665-9645
www.liquimoly.us
PN: 22076 (United States)/22110 (Canada)

Liqui Moly
Molygen New-Generation 0W-20/5 L

Full synthetic oil blended with unique MFC additive technology that prevents deposits while reducing friction loss. Provides extra wear protection in tough operating conditions. Increases mpg and engine life. Green color to help locate leaks. Specifications and approvals: API SP, ILSAC GF-6A. Recommendations: GMdexos1 Gen2, HON, HYU, ISU, MAZ, MIT, NIS, SUB, TOY.

888-665-9645
www.liquimoly.us
PN: 20438

Liqui Moly
Turbo Charger Additive

Pro-Line turbocharger additive provides needed protection and allows proper break-in of new or repaired turbocharger units. This prelubrication product is used on the installation of new or replaced turbochargers to prevent damage due to oil-less dry starts. Great as a turbo kit installation add-in.

888-665-9645
www.liquimoly.us
PN: 22076

Liqui Moly
TopTec 6600/5 L

Fully synthetic superior low-friction motor oil carrying specific OE approvals. The low viscosity ensures excellent cold-start behavior, improves engine efficiency and reduces fuel consumption. Approvals/specifications: ACEA C5/API SN Plus + RC/ ILSAC GF-5/BMW Longlife-17 FE+/MB-Approval 229.71.

888-665-9645
www.liquimoly.us
PN: 22046

Liqui Moly
Special Tec AA 0W-16/5 L

Fully synthetic premium-class motor oil with extremely low viscosity. Developed specifically to meet the high demands of modern Asian and American gasoline engines. Ideally suited for engines with direct injection and turbochargers. 0W-16 SAE J 300. Specifications and approvals: API SP; ILSAC GF-6B.

888-665-9645
www.liquimoly.us
PN: 20328

Liqui Moly
TopTec 4110 5W40/5 L

Full synthetic low-SAPS motor oil with the latest additive technology for modern engines with or without GPF/DPF particulate filters. High protection under tough conditions in high-performance engines. Specs/approvals: ACEA C3, API SN, BMW Longlife-04, MB-Approval 229.31/229.51/229.52, Porsche C40, VW511 00. Recommendations: GM dexos2, MB226.5.

888-665-9645
www.liquimoly.us
PN: 22122

Liqui Moly
Special Tec AA 5W-40 Diesel/5 L

Fully synthetic low-viscosity premium motor oil developed to meet the high demands of modern Asian and American gasoline engines. Ideally suited for engines with diesel particulate filters and turbos. Approvals: ACEA E9; API CK-4; Ford WSS-M2C 171-F1. Recommend Chry MS10902 /Isuzu/JASO DH-2/MB 228.31/Mitsubishi/Nissan/Toyota/VolvoVDS4.5.

888-665-9645
www.liquimoly.us
PN: 20426

Liqui Moly
Special Tec B FE 5W-30/5 L

Modern fully synthetic motor oil for superior performance and long engine life. Developed specifically for use in numerous BMW gasoline vehicles without particulate filter from 2002 and later. Specifications and approvals: ACEA A5; ACEA B5; API SL; BMW Longlife-01 FE.

888-665-9645
www.liquimoly.us
PN: 20444

Liqui Moly
Special Tec AA 10W-30 Diesel/5 L

Fully synthetic low-viscosity premium-class motor oil developed to meet the high demands of today’s diesel engines. Ideally suited for engines with diesel particulate filters and turbochargers. Specifications and approvals: ACEA E9; API CK-4. Recommendations: Ford WSS-M2C 171-F1; Isuzu; JASO DH-2; Mack EOS-4.5; MB 22.

888-665-9645
www.liquimoly.us
PN: 20440

Liqui Moly
Top Tec Truck 4450 15W-40/5 L

Low-SAPS premium HD motor oil for high-demand modern diesels with DPF filters and turbos. Specifications and approvals: ACEA E9, API CK-4, API SN, Detroit Diesel DFS 93K222, Ford WSS-M2C 171-F1, Mack EOS-4.5, MB-228.31, Volvo VDS-4.5. Liqui Moly recommendations: ACEA E7 Caterpillar ECF-3, Cummins CES 20086, Deutz DQCIII-10LA, JASO DH2, MAN M 3575, MTU Type 2.1.

888-665-9645
www.liquimoly.us
PN: 22038

LSX Concepts
Magnuson 2650 Hot-Rod Gilmer Drive

When all the boost from a Magnuson 2650 hot-rod supercharger is needed, LSX Concepts has come to the rescue and developed the ultimate no-slip option for the Magnuson 2650 supercharger using a 50mm-wide, 8mm HTD drive. Capable of overdrive ratios from 6%. Underdriven to 57% overdrive.

844-579-7927
www.lsxconcepts.com/collections/magnuson-2650-hot-rod-gi
PN: MAG-GILMER

Magnuson Superchargers
LSA/LS3/LS9 Magnum PI 3100 Supercharger System

The wait is over. Meet the all-new Magnuson Magnum PI supercharger kit for all V8 ’10–’15 Camaros and most Gen IV LS engines, complete with all hardware and calibration. This system will generate massive performance to dominate the street and strip. Available in 2650/3100 delivering extreme levels of performance.

805-642-8833
www.magnusonsuperchargers.com

Magnuson Superchargers
’16–’20 Toyota Tacoma Supercharger System

The wait is finally over. Meet the all-new Magnuson ’16+ Tacoma V6 supercharger kit, complete with all hardware and calibration. The system delivers 32% more power than the stock engine—a welcome upgrade for any Tacoma owner. Whether on- or
off-road, the additional performance is a must-have for every Tacoma.

805-642-8833
www.magnusonsuperchargers.com
PN: 01-19-35-005-BL

Magnuson Superchargers
Jeep Wrangler JK 1900 Supercharger System

Introducing an all-new and improved Jeep Wrangler JK supercharger kit, complete with hardware and calibration. The larger 1900 supercharger delivers 44% more power than the stock engine—a welcome performance upgrade for any Jeep. Whether on- or off-road, the additional performance is a must-have for every Jeep.

805-642-8833
www.magnusonsuperchargers.com
PN: 01-19-36-000-BL

Magnuson Superchargers
Jeep Wrangler JL/Gladiator JT Supercharger System

Introducing the all-new Magnuson Jeep Wrangler JL and Gladiator V6 supercharger kit, complete with all hardware and calibration. The system delivers more than 55% more power than the stock engine—a welcome performance upgrade for any Jeep. Whether on- or off-road, the additional performance is a must-have for every Jeep.

805-642-8833
www.magnusonsuperchargers.com
PN: 01-19-36-003-BL

Magnuson Superchargers
’19+ GM Truck Magnum Supercharger System

Magnuson Superchargers says that Magnum DI kits set the benchmark for Gen V small-block performance. Magnum DI truck kits will soon be available for all ’14+ GM trucks and SUVs and are sure to dominate the street, strip and trail. Available in 2650 and 3100 displacements for extreme levels of
performance. Launched early 2021.

805-642-8833
www.magnusonsuperchargers.com

Maradyne High Performance Fans
Cool Cat Dash Fan

Maradyne’s Cool Cat dash fan is a must for quick ventilation for drivers or passengers. This 6.5-in. dash-mount fan has two speeds and produces more than 200 cfm of air flow. Chromed for a professional look, the Cool Cat will keep users comfortable on the track, the highway or off-road.

800-403-7953
www.maradynehorsepower.com

Magnuson Supercharger
GM LT1/LT4 Magnum DI 3100 Supercharger System

Magnuson Superchargers says that the Magnum DI 3100 will set the benchmark for C7 Corvette and 6G Camaros looking to dominate the street and strip. Being 15% larger than the flagship 2650 means more air flow for more power and torque
to destroy the competition. Launched early 2021.

805-642-8833
www.magnusonsuperchargers.com

McLeod Racing
Tuner-Series Aluminum Flywheel for Honda Gen X

The new aluminum flywheel for Honda Gen X is here. Precision CNC machined from 6061 T-6 aluminum, the flywheel is equipped with a 1045 hardened-steel ring gear. It features a replaceable steel friction plate for easy rebuilds. This flywheel provides a lower moment of inertia for quicker throttle response.

714-630-2764
www.mcleodracing.com
PN: 565005

McLeod Racing
McLeod Tuner-Series Single-Disc Mag Force for Honda B- and K-Series

714-630-2764
www.mcleodracing.com

McLeod Racing
Tremec Installation Kits

The Tremec installation kits include the world famous Tremec TKO five-speed transmission. The kits will be equipped with adjustable steel X-member crossmember, a speedo adapter kit, an IsoTech transmission mount, a pilot bearing, a shifter, a reverse-light harness, and a slip yoke. The kits include a transmission and installation kit for select GM and Ford applications.

714-630-2764
www.mcleodracing.com
PN: 15009KB

McLeod Racing
McLeod Tuner-Series Mini Mag 7.25 Single-Disc Clutch Kit for Honda B- and K-Series

714-630-2764
www.mcleodracing.com

Mentor Performance Parts
Steering Wheel

Universal. Supports OEM ODM. Rally race drift to fit any car and model with the use of the correct Boss kit. Material optional: carbon fiber/PU/PVC/suede leather and aluminum frame. Easy installation and skin-comfortable.

+86-574-87913131
www.mentorparts.com
PN: MP-SWWS09

McLeod Racing
McLeod Tuner-Series Single-Disc Clutch Kit for Honda Gen X

714-630-2764
www.mcleodracing.com

Mickey Thompson Tires & Wheels
ET Street Front

Unlock the potential for quicker elapsed times with Mickey Thompson’s new ET Street Front skinny tires, featuring radial construction and lower rolling resistance. Available in four sizes for 15- 17- and 18-in. wheels, this tire complements ET Street S/S and ET Street R rear tires.

330-928-9092
www.mickeythompsontires.com

Moroso Performance Products
SBC 4.5 ROX Billet-Aluminum Valve Covers

SBC 4.5 ROX billet-aluminum valve covers are 23/4 in. tall. Fits SBC 4.5 bore space ROX cylinder heads. Clears Jesel, T&D rocker shaft assemblies. CNC machined from a billet-aluminum bar. Air-tight sealing allows the engine to pull greater vacuum. Notched at each mounting location with socket-sized clearances for quick removal and installation.

203-453-6571
www.moroso.com
PN: 68337

Moroso Performance Products
AJPE, TFX 96, TFX2000, TFX ’02, Funny Car Wet-Sump Oil Pan

AJPE TFX 96, TFX2000 and TFX ’02 Funny Car aluminum wet-sump oil pan features an L-shaped billet aluminum O-ringed oil pan rail, a -20 AN pickup and a removable windage tray. Internal baffling keeps oil in the pickup area during hard acceleration and de-acceleration. The baffling increases the pan’s lower-end strength.

203-453-6571
www.moroso.com
PN: 20056

Moroso Performance Products
GM LS Two-Stage External Oil Pump

Two-stage external oil pump GM LS bracket fits GM LS engines. Uses factory A/C bracket holes on the right side of engine block spur gear pressure section. Lightweight and efficient. Features -16AN inlet, -12AN inlet, -12AN outlet fittings. Has an external bypass for ease of adjustment. Must be used with ATI hub with integral HTD pulley.

203-453-6571
www.moroso.com
PN: 22302

Northern Radiator
Single 14-in. Brushless Fan and Shroud

Single 14-in. 500W brushless fan and shroud. 15 x 20 x 33/8. Includes proper wiring and 175–195-degree temperature sensor.

800-328-8900
www.northernradiator.com
PN: Z40161

Northern Radiator
PWM Fan Control Kit

High-efficiency pulse-width modulation cooling fan controller, 40A. Standard current capability. A/C override. Overheating protection. All components UL-94 compliant. A 180-degree (Z18352) temperature sensor included 160- (Z18351) and 195-degree (Z18353) sensors available.

800-328-8900
www.northernradiator.com
PN: Z18350

Northern Radiator
24x19 Double-Pass Interchangeable Connection Aluminum Radiator

Race pro radiator. 24x19 double-pass LS configuration with threaded inlet and outlet connections. Machined billet aluminum. SAE-compliant filler neck; 1/8-in. NPT. Steam port under inlet.

800-328-8900
www.northernradiator.com
PN: 204127

Northern Radiator
26x19 Double-Pass Interchangeable Connection Aluminum Radiator

Race pro radiator. 24x19 double-pass LS configuration with threaded inlet and outlet connections. Machined billet aluminum. SAE-compliant filler neck; 1/8-in. NPT. Steam port under inlet.

800-328-8900
www.northernradiator.com
PN: 204128

Northern Radiator
26x19 Double-Pass Interchangeable Connection Aluminum Radiator

Race pro radiator. 24x19 double-pass LS configuration with threaded inlet and outlet connections. Machined billet aluminum. SAE-compliant filler neck; 1/8-in. NPT. Steam port under inlet.

800-328-8900
www.northernradiator.com
PN: 204129

Northern Radiator
31x19 Double-Pass Interchangeable Connection Aluminum Radiator

Race pro radiator. 31x19 double-pass LS configuration with threaded inlet and outlet connections. Machined billet aluminum. SAE-compliant filler neck; 1/8-in. NPT. Steam port under inlet.

800-328-8900
www.northernradiator.com
PN: 204130

Northern Radiator
Single 16-in. Brushless Fan and Shroud

Single 16-in. 500W brushless fan and shroud; 181/8 x 203/4 x 31/2. Includes proper wiring and 175–195-degree temperature sensor.

800-328-8900
www.northernradiator.com
PN: Z40151

Northern Radiator
Single 14-in. Brushless Fan and Shroud

Single 14-in. 500W brushless fan and shroud; 147/8 x 221/8 x 33/8. Includes proper wiring and 175–195-degree temperature sensor.

800-328-8900
www.northernradiator.com
PN: Z40150

Northern Radiator
Dual 12-in. Brushless Fan and Shroud

Dual 12-in. 300W brushless fan and shroud; 15 x 26 x 31/2. Includes proper wiring and 175–195-degree temperature sensor.

800-328-8900
www.northernradiator.com
PN: Z40152

Northern Radiator
Single 16-in. Brushless Fan and Shroud

Single 16-in. 500W brushless fan and shroud; 171/4 x 221/8 x 31/2. Includes proper wiring and 175–195-degree temperature sensor.

800-328-8900
www.northernradiator.com
PN: Z40153

Northern Radiator
Single 16-in. Brushless Fan and Shroud

Single 16-in. 500W brushless fan and shroud; 181/4 x 19 x 31/2. Includes proper wiring and 175–195-degree temperature sensor.

800-328-8900
www.northernradiator.com
PN: Z40154

NRG Innovations
Prisma Bucket Seat

NRG Innovations’ first full Alcantara seats with microfiber materials that last longer and are easy to clean. The back of the seat is covered with multi-colored sparkled flakes that complete the look in the car. Each seat is compatible with full six-point safety
harnesses and HANS devices, providing maximum safety capability.

626-369-2668
www.getnrg.com
PN: FRP-302MAR-PRISMA

Performance Distributors
Dyna-Module With Built-in Rev Limiter

Performance Distributors' new internal Rev Limiting Module is now available for all DUI/HEI distributors. This high-dwell module is designed to provide superior performance, just like the company's standard 4-pin Dyna-Module, but incorporates rev-limiting capabilities. The easy-to-use DIP switch settings allow you to limit the engine's revolutions in any increment of 100, starting at 5000, up to a maximum of 9500 RPMs. The module mounts in the same location as stock by replacing the entire module and wiring-harness assembly. If you need to change the RPM limit at the track, you can simply remove your distributor cap. No external rpm limiter box, eliminating a maze of wiring for you. Compatible with 4-, 6- and 8-cylinder DUI/HEI distributors.

All it takes is a small blade screw driver to adjust the DIP switches to your desired RPM limit. Easy to follow instructions and diagrams are included. You can order the module incorporated into your DUI Distributor, or purchase it separately.

901-396-5782
www.performancedistributors.com
Info@PerformanceDistributors.com

NRG Innovations
Matsuri Steering Wheel

In 2015, NRG Innovations launched its first Drift Matsuri event at AVS. It was a milestone for the company to not only support the sport but also support enthusiasts. In 2019, NRG Innovations made a steering wheel that represents the Matsuri symbol (the Japanese word for a festival or a holiday) to remind people how the company got its start in drifting.

626-369-2668
www.getnrg.com
PN: RST-027MC-CL

Performance Distributors
Cadillac 429 DUI Distributor

Performance Distributors has applied its ignition expertise to the 429 Cadillac engines with the company's new D.U.I. Distributors.The new D.U.I.(Davis Unified Ignition) is specifically designed for the 429 built in the '60s.

Performance Distributors calibrates the advance curve on a distributor machine to accommodate the timing requirements of these unique engines. The optimized curve provides instant throttle response and maximum performance throughout your RPM range, while protecting your engine from detonation. Two versions are available. The Street/Strip version fires to a strong 7,000 RPMs, while the Racing version fires to 10,000 RPMs.

The distributor comes complete, including the dependable Street/Strip D.U.I. Coil( or Racing Coil) and Dyna-Module, which allow you to open up your plug gaps to .050”-.055”, burning your fuel more completely. Magnetic pick-up coil power is ensured by aligning the teeth on the pick-up to the teeth on the shaft reluctor, to very exact tolerances. An additional step that also ensures maximum magnetic pick-up coil power is the hand setting of the end-play between the distributor gear and the distributor housing. Proper lubrication of the D.U.I. distributor, along with test firing of the electronic components, provide you with not only an excellent performing ignition system, but also with a very reliable one.

901-396-5782
www.performancedistributors.com
Info@PerformanceDistributors.com

Performance Distributors
Pentastar V6 SOS Coils

Performance Distributors new Pentastar S.O.S. coils have enhanced coil windings, more voltage output than stock ignitions, and capabilities for quicker starting and smoother idling.

The new technology in these coils allow you to open up your plug gaps to .065”, burning your fuel more completely, leading to more power and performance. The extra voltage under load, also known as the acceleration phase, increases spark intensity for a more complete burn of the fuel mixture.

Superior thermal epoxy leads to improved heat transfer and vibration resistance. Whether you drive a Challenger, Charger, Cherokee, Wrangler, Ram or even a Caravan, you can enjoy the additional performance provided by a set of S.O.S. Coils.

901-396-5782
PN: DUI-45550
www.performancedistributors.com
Info@PerformanceDistributors.com

Performance Distributors
LS SOS Coils for GM 5.3 and 6.2L (’14–’19)

Performance Distributors(Davis Unified Ignition) offers new applications for the LS S.O.S.(Sultans Of Spark) ignition coils :

Chevrolet Camaro (19-16)
Chevrolet Corvette (19-14)
Chevrolet Silverado 1500 (19-14)
Chevrolet Tahoe (19-15)
GMC Sierra 1500 (19-14)
GMC Yukon (19-15)
GMC Yukon XL (19-15)

The new technology in the coils allow you to open up your plug gaps to .065”, burning your fuel more completely, leading to more power and performance. The Davis Unified Ignition S.O.S. coils produce 28,000 volts under load, or your acceleration phase compared to the stock 21,000. That’s 7,000 more volts under load per coil, which is a whopping 56,000 volts more than a stock ignition per engine! The coils are compatible with flash devices and programmers.

Superior thermal epoxy leads to improved heat transfer and vibration resistance. Years in the making, the S.O.S. coils are designed with enhanced windings, and mount in the OEM location. The additional energy produced results in quicker starting, and smoother idle. Instant throttle response is there when you “step on it.” Brass towers resists corrosion and has excellent conduction properties.

901-396-5782
www.performancedistributors.com
Info@PerformanceDistributors.com

Performance Electronics
PE3-IG8 Ignition Controller

Control the ignition on a carbureted or mechanically injected engine directly from a smartphone with the PE3-IG8 ECU. It features Bluetooth connectivity, data logging and control for up to eight ignition coils. The smartphone app is available for iOS and Android devices for complete control of an engine without having to connect to a laptop.

513-777-5233
www.pe-ltd.com

Performance Electronics
Dual-Channel PE Wideband O2 Kit

The dual-channel Performance Electronics wideband kit allows users to monitor live air-fuel ratios on both banks of an engine from a smartphone, without gauges. The kit includes two Performance Electronics wideband controllers with O2 sensors, bungs and one 6-ft. O2 sensor extension cable. Installation is easy with only two wires to connect. The free app is available on iOS and Android.

513-777-5233
www.pe-ltd.com
PN: 50070105

PerTronix
Extended Billet Distributor Applications

PerTronix has expanded its Flame Thrower billet distributor line to include specialty niche applications for the discerning automotive enthusiast. From Ford Flatheads to AMC/Jeeps or Cadillacs to Corvairs, users can count on the company’s performance-proven systems. Equipped with PerTronix Ignitor technology, users will never have to replace their points again.

909-599-5955
www.pertronixbrands.com

PerTronix
Extended Coil-On-Plug/Coil-Near-Plug Applications

PerTronix has expanded its popular Flame Thrower coil line with new offerings for late-model GM, Chrysler and Ford engines. Superchargers, turbo chargers and nitrous all increase the demand on the ignition system. Whether it’s a performance application with add-ons or an increase in power for the stock ignition, Flame Thrower coils won’t disappoint.

909-599-5955
www.pertronixbrands.com

PerTronix
Flame Thrower MagX2 8mm Black Ceramic Boot Sparkplug Wires

PerTronix MagX2 black ceramic boot sparkplug wires are constructed from two layers of high-temperature silicone rated up to 600°F. The ceramic sparkplug boot is the star of the show, acting as the primary protection against direct heat and withstanding up to 2,000°F. Available for universal (45-, 90-degree and straight) and 45-degree LS applications.

909-599-5955
www.pertronixbrands.com

PWR Advanced Cooling Technology
LT4 Gen 2 Slanted Intercooler Bricks

PWR’s bar and plate intercooler brick for the LT4 engine uses bar and plate technology developed to provide increased durability at a fraction of the weight. Using the same high-efficiency fins and turbulators used across PWR’s range of high-performance coolers, the LT4 brick is said to outperform not only OEM bricks but also all of the competition’s.

317-293-4100
www.crracing.com
PN: CR-UC-SPK006B

PWR Advanced Cooling Technology
Universal 42mm Oil Cooler Module With 9-in. SPAL Fan, 12.75-x9.75 in.

The internal turbulators allow for maximum heat rejection while having low-pressure drop. PWR’s oil cooler keeps weight to a minimum while maximizing heat rejection. With an aluminum shroud and a 9-in. SPAL fan, users can keep their oil cool without needing direct air flow.

317-293-4100
www.crracing.com
PN: CR-UC-RQC001C

PWR Advanced Cooling Technology
LS9 Intercooler Bricks

PWR’s bar and plate intercooler brick for the LS9 engine uses bar and plate technology developed to provide increased durability at a fraction of the weight. Using the same high-efficiency fins and turbulators used across PWR’s range of high-performance coolers, the LS9 brick outperforms not only OEM bricks but also all of the competition’s.

317-293-4100
www.crracing.com
PN: CR-UC-SPK007B

PWR Advanced Cooling Technology
LSA Intercooler Brick for CTS-V

PWR’s bar and plate intercooler brick for the LSA-powered CTS-V uses bar and plate technology developed to provide increased durability at a fraction of the weight. Using the same high-efficiency material used across PWR’s range of high-performance coolers, the LSA CTS-V brick is said to outperform not only OEM bricks but also all of the competition’s.

317-293-4100
www.crracing.com
PN: CR-UC-SPI015B

PWR Advanced Cooling Technology
Hellcat Intercooler Bricks

PWR’s intercooler brick for the 6.2L Hellcat engine uses bar and plate technology developed to provide increased durability at a fraction of the weight. Using the same high-efficiency fins and turbulators used across PWR’s range of high-performance coolers, the Hellcat brick outperforms not only OEM bricks but all of the competition’s.

317-293-4100
www.crracing.com
PN: CR-UC-SPK008B

PWR Advanced Cooling Technology
Civic Type-R ’17–’19 Intercooler

PWR’s Civic Type R Intercooler uses the company’s high-efficiency extruded tube paired with the same fin technology used in race categories worldwide. The intercooler will ensure that users get the charge cooling they need without sacrificing coolant temperature. With countless laps of testing, PWR was able to run 10 times more laps without entering limp mode.

317-293-4100
www.crracing.com
PN: CR-UC-RPI019B

PWR Advanced Cooling Technology
Porsche ’11–’19 991/911 Turbo Intercoolers

PWR’s Porsche turbo intercoolers use the company’s high-efficiency turbulated tube paired with the same fin technology used in race categories worldwide to offer a drop-in solution that will not heat soak on the street or track. With countless laps of testing, PWR was able to run with inlet temps not exceeding 115°F.

317-293-4100
www.crracing.com
PN: CR-UC-SPK002B

PWR Advanced Cooling Technology
Subaru WRX STI ’08–’14/STI ’15+ Top-Mount Intercooler Kit

PWR’s Subaru intercooler uses the company’s high-efficiency turbulated tube paired with the same fin technology used in race categories worldwide. In countless laps of testing paired with PWR’s high-performance radiator replacement, it ran inlet temps very close to ambient from start to finish.

317-293-4100
www.crracing.com
PN: CR-UC-SPI001B

PWR Advanced Cooling Technology
Universal Rear-Mount Drift Radiator With Brushless Fans

PWR’s new universal rear-mount drift radiator maintains the design and functionality of the previous version with the addition of dual SPAL 14-in., 500-watt brushless fans. The increased cfm and outstanding fan curve data of these fans enhances performance and is said to be perfect for high-horsepower vehicles geared toward Pro/Am and professional drifting.

317-293-4100
www.crracing.com
PN: CR-UC-SPR001C

PWR Advanced Cooling Technology
OEM Replacement BMW M4 F82 87mm Water-to-Air Intercooler

PWR’s BMW M4 water-to-air intercooler is designed with the company’s high-performance tube and internal turbulators for maximum performance. This intercooler gives the user significant increases in horsepower and a massive reduction in potential heat soaking compared to OEM and other aftermarket options.

317-293-4100
www.crracing.com
PN: CR-UC-RPI015B

PWR Advanced Cooling Technology
Cadillac CTS-V/Camaro ZL1 ’16–’19 Primary Heat Exchanger

PWR’s ’16–’19 CTS-V and Camaro ZL1 heat exchanger mounts in the stock location using factory hoses and clamps. With its high-efficiency core, it produces some of the lowest IATs on the market. This is a must-have part for increased boost levels and in hot climates.

317-293-4100
www.crracing.com
PN: 56-00016

PWR Advanced Cooling Technology
Toyota Supra ’19+ Heat Exchanger

PWR’s heat exchanger uses a high-efficiency and engineered tube paired with the same fin technology used in race categories worldwide. The core features a 4.85mm R-fin with a high fin density and dimpled tubes, and it bolts on like a factory component. Included on the top left is a -4 bung to ensure that all air can be bled out after installation.

317-293-4100
www.crracing.com
PN: CR-UC-SPR015B

PWR Advanced Cooling Technology
87mm Air/Air Intercooler Core, 24x12 in.

PWR’s intercooler cores use the company’s high-efficiency extruded tube paired with the same fin technology used in race categories worldwide. By providing more air flow to the downstream coolers, the intercooler cores ensure that users get the charge cooling needed without sacrificing coolant temperature.

317-293-4100
www.crracing.com
PN: CR-IC-1009

PWR Advanced Cooling Technology
Chevrolet Camaro ’16+ ZL1/SS Oil Cooler

PWR engineered an oil cooler solution for Gen 6 Camaros. Through testing and data acquisition, PWR developed a oil cooler that dropped oil temperatures by up to 50°F. When paired with PWR’s Camaro ZL1 heat exchanger, intake air temps were unaffected when removing the factory auxiliary heat exchanger to mount this oil cooler.

317-293-4100
www.crracing.com
PN: CR-UC-SQC014B

QA1
New Suspension Kits

Want better handling and cornering ability? Turn to QA1’s handling suspension kits for the best ride that fits the need. Available in three different levels of performance, these handling kits offer easy bolt-in installation and seamlessly work with whatever OE
component each piece attaches to.

952-985-5675
www.qa1.net

PWR Advanced Cooling Technology
42mm Oil Cooler, 14.09x10.39 in., Includes Mounting Brackets

Using PWR’s engineered turbulated tube, oil can turbulate more internally, resulting in higher heat rejection with little pressure drop. PWR incorporates R-fin technology, which increases the heat rejection of the cooler. With the included set of extra mounting brackets, users can mount this cooler more than one way.

317-293-4100
www.crracing.com
PN: CR-UC-SQC010B

QA1
New GM Control Arms

QA1 control arms are among the lightest, strongest and best-looking control arms available for your ride. Uniquely engineered with key features optimized for either street-performance, Pro-Touring or drag-race vehicles, these American-made control arms ride better, corner harder and launch faster.

952-985-5675
www.qa1.net
PN: SERIES

QA1
’65–’70 GM B-Body Full-Vehicle Suspension System

Ready to transform a ’65–’70 Impala into a serious street-erformance, Pro-Touring or drag-race machine? Check out QA1’s all-new full-vehicle suspension system. Offering performance-spec geometry improvements with adjustable ride height for the perfect stance, the complete kit or build-as-you-can components are an easy-to-install bolt-in system.

952-985-5675
www.qa1.net

QA1
’03–’11 Crown Victoria/F-100 Coil-Over Conversion System

QA1’s front coil-over conversion system is the easiest way to get a perfect stance while gaining ride and performance from QA1’s adjustable valving. These coil-overs also work on Ford F-100s with the front Crown Victoria swap.

952-985-5675
www.qa1.net

RAB Performance Parts
4500 BBC

RAB 4500 BBC serpentine drive system in 6061 billet includes a 120-amp alternator, a water pump, a Saginaw power-steering pump, a crank, all pulleys, a Gates tensioner and belt and all hardware. Black anodized.

909-889-2124
www.rabperformanceparts.com
PN: RAB 4500 BBC

RAB Performance Parts
6142 V-Belt for SBC

The RAB 6142 SBC V-belt drive system comes with a 120-amp alternator, a long water pump, Saginaw power steering with belt, and all pulleys made out of 6061 billet. Includes all hardware. In chrome.

909-889-2124
www.rabperformanceparts.com
PN: RAB 6142 SBC V-BELT

RAB Performance Parts
5000-1 SBC

RAB 5000-1 small-block Chevy serpentine billet drive system with A/C includes a 120-amp alternator, a high-flow water pump and SD-7 A/C compressor Type II power steering and external reservoir plus all the pulleys, a Gates belt and tensioner, and all hardware. Black anodized.

909-889-2124
www.rabperformanceparts.com
PN: RAB5000-1

RAB Performance Parts
2000 SBC Copper

RAB 2000 small-block Chevy outboard in a copper finish or rose gold, all 6061 billet. Includes a 120-amp alternator, an SD-7 A/C compressor Type II, a power-steering pump with external reservoir, and a water pump, crank, all pulleys and a Gates tensioner and belt and all hardware.

909-889-2124
www.rabperformanceparts.com
PN: RAB 2000 SBC W/AC

RAB Performance Parts
5500-1 BBC

The RAB 5500-1 BBC billet serpentine drive system comes with a 120-amp, single-wire alternator, an SD-7 A/C compressor and high-flow water pump, a Type II power- steering pump with external reservoir, a Gates tensioner and belt, a crank and all pulleys and hardware. Black anodized.

909-889-2124
www.rabperformanceparts.com
PN: RAB 5500-1 BBC W/AC

Red Roberts Inc. (DBA Driveline Component Co.)
External Slave Cylinder Kits

External slave cylinder kits for various GM and Ford vehicles. Comes with mounting brackets, special setting gauge, fittings and a bleeder kit. Available with bullnose end or spade end.

714-651-0829
www.redrobertsinc.com

RaceDeck
Free-Flow XLC Shop and Garage Flooring

Taller, beefier and offering first-of-its-kind slip-resistant technology, Free-Flow XLC is the new king of the garage. As the first commercial-grade product to join the RaceDeck garage floor line, XLC brings a brand-new level of toughness that is ideal for commercial garages, shops, dealerships and more.

801-746-0143
www.racedeck.com
PN: FFXLCGRPH

Red Roberts Inc. (DBA Driveline Component Co.)
’69–’70 Mustang Hydraulic Conversion Kit

The hydraulic conversion changes the stock linkage to hydraulics using the stock pedal. The kit includes firewall brackets, pedal brackets, a rod assembly and a master-cylinder adapter. It comes with various options such as with master cylinder, with hydraulic throwout bearing or external slave cylinder. No drilling or modifying of pedal or firewall.

714-651-0829
www.redrobertsinc.com

Red Roberts Inc. (DBA Driveline Component Co.)|
Accuvalve

This accumulator valve allows for adjusting the hydraulics so that the pedal can disengage the clutch lower on the pedal. It doesn’t give the pedal more throw for disengagement. Small and compact, it can fit inline or mount to the end of the master cylinder. It can accommodate AN3 or AN4 lines.

714-651-0829
www.redrobertsinc.com

Red Roberts Inc. (DBA Driveline Component Co.)
Mid Shift Conversion T56 Transmissions

Converts T56 transmission shifter locations from stock to front. Comes with socket conversion, roll pin and shifter. Shifters can be of various offsets to accommodate various models and consoles. T56 transmission must be torn down to install.

714-651-0829
www.redrobertsinc.com

RideTech
Chevy Silverado Lowering Suspension

Lowered stance. Adjustable ride height, 3- to 4-in. front drop and 5.5- to 6.5-in. rear drop. Improved ride quality and handling. Rebound adjustable shocks with 1,000,001-mi. warranty. Bolt-on installation. No welding. (Rear bump-stop bracket must be removed.) Corrected driveline angles to prevent driveline vibrations.

812-481-4787
www.ridetech.com
PN: 11700110

RideTech
Camaro Subframe Connectors

Fabricated from 1.5x3-in. to .125-in.-wall steel for high strength. Mounts solidly into three existing floor pan bolt locations for maximum strength and completely replaces the original leaf spring pocket. No fabrication required; direct bolt-on.

812-481-4787
www.ridetech.com
PN: 11167300

RideTech
F-150 Truck Lowering Suspension

Coil-over front suspension with a Fox 2-in. single adjustable shock and 10-in. 800-lb. springs. All coil-overs include the 1,000,001-mi. warranty. Includes 2-in. drop spindles. No cutting required; completely bolt-on installation. A 4-in. drop with adjustment via coil-over adjustment. Includes all necessary fasteners and hardware.

812-481-4787
www.ridetech.com
PN: 12180110

Ripp Superchargers
Prototype Supercharged V6 MOPAR Car XL, Intercooler Kit (Challenger, Charger, 300)

718-815-1313
www.rippmods.com

Ripp Superchargers
’11–’20 3.6L V6 Dodge Challenger, Charger and Chrysler 300 Cat-Back Exhaust

’11–’20 3.6L V6 Dodge Challenger, Charger and Chrysler 300 Cat-Back Exhaust

T304 stainless-steel 2.5-in.-diameter mandrel-bent piping with a 2.75-in. H-pipe to balance both left and right banks; 3-in. stainless resonators. Twin 25-in.-diameter oval mufflers with 16-gauge-wall tubing. Dual exhaust design. Tipless design for OEM exhaust valence; 15 lbs. lighter than factory system.

718-815-1313
www.rippmods.com
PN: 1114LX36CBE-1

Ross Racing Pistons
4.8L/5.3L (Including Late-Model) Direct-Injection Pistons

Custom quality and features in the most popular stroke, rod and compression combinations, all at a convenient shelf-stocking price. Features include high-strength 2618-T61 aluminum forgings, proprietary skirt profiles and cams, double-broached and forced-pin oiling, double-diamond-plunged ring grooves, performance ring set and much more.

310-536-0100
www.rosspistons.com

Ross Racing Pistons
3D Dome Piston Profiling

Ross Pistons now offers 3D Dome Piston Profiling for exact fit. Great for max compression ratio. Using CMM technology to digitize molds and cylinder head along with ultra–accurate CNC machining centers to allow production of a perfect piston-to-head fit. Include 3-D profile milling, and they have the optimum strength-to-weight ratio.

310-536-0100
www.rosspistons.com

RTAMO Titanium Racing Parts
Titanium Exhaust Manifold Stud Kit (Grade 5)

Material: titanium alloy. One kit includes one stud and one nut plus one washer. Stud size: M8/M10 x 1.25 pitch by 45/55 mm. Nut size: 12-point M8/M10 x 1.25 pitch. Washer size: M8/M10. Stud/washer/nut assembly weighs only 11 grams. Color: titanium natural, burnt blue. High strength. Super light; 45% lighter than steel. Durable, no rust.

+86-917-3873220
www.rtamoracing.com
PN: 8-01-0010

RTAMO Titanium Racing Parts
Grade 10.9/12.9 Titanium Racing Bolts

High-performance titanium 12.9-grade wheel bolt. Metric bolts. Grade 12.9. Conical seat. Sixty degrees. Size (mm): M14 x 1.5 pitch x 52 length. Weight: 69 grams/2.43 oz. per piece. Tensile strength: 1,200 MPa.

+86-917-3873220
www.rtamoracing.com
PN: 8-01-0014

RTAMO Titanium Racing Parts
Two-Piece/Three-Piece Wheel Rim Titanium Bolt Kit

Twelve-point titanium rim bolt and nut kit. Aftermarket product. Grade 5. Titanium alloy (TI6AL4V). ISO 9001. UKAS-certified manufacturer. Includes M8x32L12-point (five pieces) and M8 nut (five pieces). High strength: 900–1,050 Mpa (130,000–152,000 psi). Excellent anti-corrosive performance.

+86-917-3873220
www.rtamoracing.com
PN: 8-01-0011

RTAMO Titanium Racing Parts
Titanium Universal Shift Knobs

Made from solid titanium block and precise CNC-machined solid titanium knob has a very solid grip and smooth shifting into gears. Universal fitment for manual or automatic applications. Available in 8mm x 1.25 pitch, 10mm x 1.25 pitch, 10mm x 1.5 pitch, and 12mm x 1.25 pitch.

+86-917-3873220
www.rtamoracing.com
PN: 8-01-0012

SamcoSport
Performance Silicone Hose Kit

SamcoSport performance silicone hose kit for ’15–’20 V8 Chevrolet/GM pickup and SUV applications, including 4.8, 5.3, 6.2 LV3, L83 and L86 Silverado, Sierra, Tahoe, Suburban and Yukon Denali. Four-piece kit includes radiator and surge/vent hoses. Also includes approved clamps to uphold lifetime warranty.

+44-1443238464
www.samcosport.com
PN: TCS711C

SamcoSport
TCS710H

+44-1443238464
www.samcosport.com

SamcoSport
McLaren Performance Silicone Hoses

Developed in partnership with and available exclusively through Renaissance Speed, SamcoSport flexible McLaren 570S/600LT four-ply silicone upper boost hoses are specially designed to prevent blow-off at high boost and support up to 40 psi of pressure. They come with a SamcoSport lifetime warranty. Visit renaissancespeed.com to order now.

+44-1443238464
www.samcosport.com
PN: TCS732T

SamcoSport
Performance Silicone Hoses (Race Parts)

The SamcoSport universal range of silicone race parts is ideal for many custom applications, including installation of radiator hoses, cooling systems, intercooler hoses, turbocharger hoses, supercharger hoses, air and induction hoses, oil hoses and air breather hoses. SamcoSport also caters to fuel systems with its unique range of Profuel hoses.

+44-1443238464
www.samcosport.com

Shanghai Jiawen Performance Industries Co. Ltd.
Exhaust Pipes

+86-2164512099
www.jiawen.com.cn

Shanghai Jiawen Performance Industries Co. Ltd.
Downpipe

Find power and enthusiasm in Jiawen. It specializes in designing, producing and selling all kinds of exhaust performance parts such as mufflers, tips, mandrel tubes, downpipes, headers and relevant clamps. Most of the parts are made from T304 SS material with high-quality TIG welding and mirror polishing. High-standard CNC flanges.

+86-2164512099
www.jiawen.com.cn

Shanghai Jiawen Performance Industries Co. Ltd.
Downpipe

All our downpipes are designed and made out of 304 stainless-steel material with high-quality TIG welding and polishing. They enjoy great popularity in the world market and have built a following among our regular customers. From 1.25 mm to 1.50 mm wall thickness to guarantee the extraordinary lifetime.

+86-2164512099
www.jiawen.com.cn
PN: JIAWEN-E10000

Shanghai Jiawen Performance Industries Co. Ltd.
Muffler

There are different choices available in Jiawen mufflers, from stainless steel to aluminized steel and even carbon steel, from TIG to MIG welding, from robot welding to welding by hand, from street performance to racing performance. Whatever users want, Jiawen says it has the right option.

+86-2164512099
www.jiawen.com.cn
PN: JIAWEN-M10000

Shanghai Jiawen Performance Industries Co. Ltd.
Tip

The tips made at Jiawen share great popularity in the world market. All T304 SS material with mirror polishing and laser-cut edges. TIG robot and hand welding. All details are well controlled in order to send customers perfect-quality products and set up friendly and long-term business relationships.

+86-2164512099
www.jiawen.com.cn
PN: JW-AA10000

Shanghai Jiawen Performance Industries Co. Ltd.
Downpipe

+86-2164512099
www.jiawen.com.cn

Spa Technique Inc.
Spa FireSense + Fire Suppression System

Spa FireSense+ is a new line of fire suppression systems. FireSense+ introduces a new suppression agent into the motorsports domain. Spa presents 4Fire Universal. 4Fire has quick fire-out capabilities, works on lithium battery fires, and is nonconductive to 1,000 volts. This is the SFI17.1 entry with the universal head and AMU block.

317-271-7941
www.spatechnique.com
PN: SPA+ SFI 17.1

Shanghai Jiawen Performance Industries Co. Ltd.
Muffler

+86-2164512099
www.jiawen.com.cn

Spa Technique Inc.
FireSense 8865

Spa is pleased to present a brand-new FIA 8865-2015 fire suppression system. Branded FireSense 8865, it utilizes a new fire suppression fluid (nonconductive to 1,000 volts) and advanced nozzle technology along with an APS internal design. It has resulted in a small but highly effective system.

317-271-7941
www.spatechnique.com
PN: FIRESENSE8865

Spa Technique Inc.
QR6 Bolt-On

QR6 is a new six-hole, bolt-on steering wheel quick release. FIA certified. Group N.

317-271-7941
www.spatechnique.com
PN: QR6

Specialty Products Co./SPC Performance
Porsche Rear Performance Kit

Get the optimum track setup with SPC’s six-arm set. This set includes two each of part numbers 72610, 72630 and 72640. With aggressive handling and maximum Gs, track vehicles require the best adjustment and extra strength versus the OE arm. These aluminum forged arms give the user a complete solution for a track-ready 996/997 or 981/987.

800-525-6505
www.specprod.com
PN: 72600

Spa Technique Inc.
SFI 17.2 Fire System

SFI 17.2 certified fire suppression systems. Spa Technique offers an electrical or a mechanical option in a lightweight, inexpensive package. It offers these systems with a choice of suppressants. Choose between the Extreme line, which utilizes 3M Novec 1230 fire protection fluid, or the new FireSense+ line, which contains 4Fire Universal.

317-271-7941
www.spatechnique.com
PN: SPA SFI 17.2

Speed Wiring Products LLC
Systems Control Wiring Harness

919-300-5070
www.speedwiringproducts.com

Specialty Products Co./SPC Performance
Corvette C4 Adjustable Upper Control Arms

SPC uses a 1/2-in. extended ball stud to improve camber curve. The fully rebuildable and greasable ball joints can also be customized for the ride with available OE length and 1/4-in. extended studs.

800-525-6505
www.specprod.com
PN: 97190

Speedway Motors
G-Comp Universal Front Suspension

Speedway Motors’ G-Comp line of suspension parts is engineered for performance, strength and value. This universal G-Comp front suspension kit is a complete weld-in front subframe assembly for converting almost any vehicle to modern-day suspension geometry and is available for 60- and 62-in. track widths.

800-979-0122
www.speedwaymotors.com
PN: 3502000-60

Stainless Headers Manufacturing Inc.
Pontiac 400/455 D-Port Turbo Log Manifolds

Designed to fit the D-port Pontiac V8 cylinder heads, these bolt-on turbo headers are an ideal solution to any packaging concerns. Made of .120-wall U.S.-made 304 stainless-steel tube, these modular log manifolds can handle the heat and vibrations that come from a turbocharged engine. The D ports utilize a divider wall to assist in anti-reversion and maintain flow.

800-290-3920
www.stainlessheaders.com
PN: SHM-MTH-PONT-455D

Stainless Headers Manufacturing Inc.
Lightweight Aluminum

Made of U.S.-sourced 6061 aluminum and are TIG-welded for optimal performance. The aluminum race mufflers are performance proven and are made to withstand the most extreme conditions. Packed with stainless-steel scrubble and TIG-welded, these U.S.-made aluminum race mufflers are said to be the ultimate in performance and quality.

800-290-3920
www.stainlessheaders.com
PN: SHM-3-12-6061

Stainless Headers Manufacturing Inc.
Oval Aluminum Exhaust

These premium U.S.-made 6061 exhaust kits are hand-fabricated and TIG-welded by the best in the business. The company offers mandrel bends, oval tubing, bullet mufflers and more in its exclusive aluminum oval exhaust kits. Perfect for high-performance, low-weight racing applications. Engineered to perform stronger, fit better, weigh less, and outdrive the competition.

800-290-3920
www.stainlessheaders.com
PN: SHM-OCK-6061

The Stop Shop
Rear Axle Brake Lines for ’99–’04 Silverado/Sierra

Made from copper nickel tubing that is very easy to bend by hand. Cut to the correct length and flared with the correct fittings for the rear axle. Compatible with ’99–’04 Silverado/Sierra 1500, 1500 HD and 2500. Can be bent into place to match originals.

614-557-3442
www.thestopshop.com
PN: CN1RR

Stainless Headers Manufacturing Inc.
Complete-in-a-Weekend Turbo Header Systems

Complete bolt-in turbo systems include headers, turbos, sensors, an intercooler, charge piping, tune, injectors and more. Said to be the most complete turbo system on the market, with detailed installation instructions and play-by-play videos or images for every installation step. The first complete kit on the market able to be done in a weekend.

800-290-3920
www.stainlessheaders.com
PN: SHM-WTK-4523A-1-A

The Stop Shop
Copper Nickel Brake Line Shop Kit

This complete copper nickel brake line kit is one that The Stop Shop believes every shop should have on its shelves. The Kit includes the most common brake line sizes as well as fittings, unions, tees and clips as well as 100 ft. of 3/16-in. and 50 ft. of 1/4-in. copper nickel tube. There is also a large assortment of fittings, unions, tees and clips. Covers SAE inverted flare and ISO/bubble flare.

614-557-3442
www.thestopshop.com
PN: TSSSHOPKIT

The Stop Shop
Nylon Fuel Repair Kit

This is the company’s complete nylon fuel hose kit, which it believes every shop should have on its shelves. This kit includes the most common parts needed to change or fix any fuel line problem. Covers repairs on 5/16 or 3/8 fuel lines (8 mm and 10 mm).

614-557-3442
www.thestopshop.com
PN: TSSFUELKIT

The Stop Shop
Stainless Rear-Axle Brake Lines for ’97–’01 Jeep Cherokees

Pre-bent factory reproduction lines made in stainless steel. Pair of lines that run from the center rear axle block out to both rear wheels. Fits all rearends for ’97–’01 Jeep Cherokees. Made in the U.S.A.

614-557-3442
www.thestopshop.com
PN: J1000RA

Superformance
GT40 50th Anniversary (Tool Room)

To celebrate the P1075’s unrivaled success at Le Mans, Gulf Oil, Safir GT40 and Superformance have partnered in a limited edition ’69 Tribute GT40. This edition mechanically and visually replicates how these winning cars were raced and is supplied with a guitar and plaque naming employees working for the Gulf Racing Team in the ’69 season.

800-297-6253
www.superformance.com/factory-models/gt40-toolroom
PN: P/1XXX

Tarox Performance Brakes
Toyota Supra MK5 Front Brake Upgrade Package for Stock Calipers

The front brake upgrade package incorporates a pair of direct-replacement performance front rotors in a choice of patterns (Sport Japan drilled and slotted shown), a set of Corsa track-day-spec front pads, and a stainless hose kit. Delivering a significant improvement for much less than the cost of a big-brake kit.

304-715-3322
www.tarox.com
PN: 5550.STAGE1

Switch Electric Vehicles
The Switch Chassis

Fast, rugged, and no gas. Build and customize your own EV. Start a business, turn some heads or both. The Switch attracts a crowd.

707-829-5746
www.switchvehicles.com/retail
PN: SL/AC-96

Tarox Performance Brakes
Sport Compact Front Brake System for Fiat 500 Abarth

Tarox Sport Compact brake kits take everything the company has learned in a 40-year history, transfers it, shrinks it and engineers it into something more compact at a more accessible price point. It is shown here for the Fiat 500 Abarth but is also available for a range of cars, including the VW GTI, Subaru Impreza, Toyota 86, Ford Fiesta ST and many more.

304-715-3322
www.tarox.com
PN: KMFI0900

Tarox Performance Brakes
Bespoke Two-Piece Rotors for Alfa Romeo Giulia Quadrifoglio

The Tarox bespoke performance range is a unique service that has grown in popularity with the increase in manufacturers’ use of a racing-style brake systems on street cars. Recreating the stock dimension Giulia QV front rotor in a two-piece, slotted configuration improves performance and saves weight for drivers demanding the most from these cars.

304-715-3322
www.tarox.com
PN: S2-3138

Tech Line Coatings
Silver Carrera Coat

The Carrera exhaust coating is designed as an air-curing, high-temperature-resistant coating. Carrera silver can handle substrate temperatures of 1,400°F and has excellent chemical and corrosion resistance. May be applied over any of the company’s base coats to increase the thermal barrier function. Low VOC.

865-773-0599
www.techlinecoatings.com
PN: CAR-SIL

Tech Line Coatings
Satin-Black Carrera Coat

The Carrera exhaust/thermal barrier coating is designed as an air-curing, high-temperature-resistant coating. Carrera satin black can handle substrate temperatures of 1,800°F and has excellent chemical and corrosion resistance. May be applied over any of the company’s base coats to increase the thermal barrier function. Low VOC.

865-773-0599
www.techlinecoatings.com
PN: CAR-SB

Tech Line Coatings
Carrera Coat Thermal Dispersant

Carrera thermal dispersant is designed to rapidly disperse heat away from any component. It aids in cooling by evenly distributing and dispersing heat over a surface. Excellent for intake manifolds, intercoolers, turbo intake housings, oil pans and more. It is an excellent oil shedder, with good chemical and corrosion resistance. Air-cure coating.

865-773-0599
www.techlinecoatings.com
PN: CAR-TD

Tech Line Coatings
Copper Carrera

Carrera exhaust coating is designed as an air-curing high-temperature-resistant coating. Carrera copper can handle substrate temperatures of 1,400°F and has excellent chemical and corrosion resistance. May be applied over any of the company’s base coats to increase the thermal barrier function. Low VOC.

865-773-0599
www.techlinecoatings.com
PN: CAR-CPR

The Tuning School
Ford Coyote Tuning Using SCT Advantage

The Ford Coyote complete set using SCT Advantage is an online and printed course combo designed for learning at home. In 10 comprehensive sessions, users are guided through the materials as they learn a step-by-step tuning process focused entirely on the powerful Coyote platform.

727-264-8875
www.thetuningschool.com
PN: OLC3141-G

The Tuning School
Ford Coyote Tuning Using Horsepower Tuners

The Ford Coyote complete set is an online and printed course combo designed for learning at home. In 10 sessions, users learn a step-by-step tuning process entirely focused on the powerful Coyote platform with in-depth instruction for tuning specific changes for Gen I (’11–’14), Gen II (’15–’17) and Gen III (’18+) Coyotes.

727-264-8875
www.thetuningschool.com
PN: OLC4141-G

The Tuning School
Dodge Transmission Tuning Using Horsepower Tuners

The Dodge transmission complete set is an online and printed course combo designed for learning at home. In six comprehensive sessions, users are guided through the materials as they learn a step-by-step tuning process for Dodge, Ram and Jeep.

727-264-8875
www.thetuningschool.com
PN: OLC4248-G

The Tuning School
GM LS Tuning Using Horsepower Tuners

The GM Level 1 complete set is an online and printed course combo designed for learning at home. In 10 sessions, users learn a step-by-step tuning process for Gen III-/Gen IV-engine GM vehicles.

727-264-8875
www.thetuningschool.com
PN: OLC4021-G

Top Speed Auto Accessories Inc.
Ferrari 430 Coupe and Spider ’05–’09 (F1 and Manual) Street Spec Full Titanium Cat-Back Exhaust System Without Valves

Full titanium exhaust system (F1 and manual). Simplified V2 design drastically improves engine-compartment aesthetic and performance. Bolt-on design requires no modifications to install. Deep, aggressive exhaust tone. Reduces weight of exhaust system by 75 lbs.

972-233-0888
www.topspeedauto.com
PN: TITANIUM-FERRARI-F430

Top Speed Auto Accessories Inc.
Chevrolet Corvette C8 6.2L ’20–Up Titanium X-Pipe Exhaust Purple Piping and Purple Tips

Chevrolet Corvette C8 6.2L V8 ’20–’21 X-pipe exhaust system; 100% full titanium with 114mm quad tips and 76mm piping. All burnt purple piping with burnt purple tips. Very light weight; 28 lbs. total.

972-233-0888
www.topspeedauto.com
PN: TITANIUM-CORVETTE-C8 ALL BURNT PURPLE

Top Speed Auto Accessories Inc.
Chevrolet Corvette C8 6.2L ’20–Up Titanium X-Pipe Exhaust Polished Tips

Chevrolet Corvette C8 6.2L V8 ’20–’21 X-pipe exhaust system; 100% full titanium with 114mm quad tips and 76mm piping. Raw-finished titanium piping with polished tips. Weighs 28 lbs.

972-233-0888
www.topspeedauto.com
PN: TITANIUM-CORVETTE-C8 POLISHED TIPS

Top Speed Auto Accessories Inc.
Chevrolet Corvette C8 6.2L ’20–Up Titanium X-Pipe Exhaust Blue Tips

Chevrolet Corvette C8 6.2L V8 ’20–’21 X-pipe exhaust system; 100% full titanium with 114mm quad tips and 76mm piping. Raw-finished titanium piping with burnt blue tips. Weighs 28 lbs.

972-233-0888
www.topspeedauto.com
PN: TITANIUM-CORVETTE-C8 BURNT BLUE TIPS

Top Speed Auto Accessories Inc.
Chevrolet Corvette C8 6.2L ’20–Up Titanium X-Pipe Exhaust Blue Piping and Blue Tips

Chevrolet Corvette C8 6.2L V8 ’20–’21 X-pipe exhaust system; 100% full titanium with 114mm quad tips and 76mm piping. Raw-finished titanium piping with burnt blue tips. Very light weight; 28 lbs. total.

972-233-0888
www.topspeedauto.com
PN: TITANIUM-CORVETTE-C8 ALL BURNT BLUE

Top Speed Auto Accessories Inc.
Corvette C8 6.2L V8 ’20–’21 Straight Pipe Exhaust System

C8 Corvette true dual race pipes. Full 100% titanium with polished tips; 3-in. tubing with quad 4.5-in. tips. Creates a unique, aggressive sound and removes almost 100 lbs. from the rear of the vehicle.

972-233-0888
www.topspeedauto.com
PN: TITANIUM-CORVETTE-C8T

Top Speed Auto Accessories Inc.
Lamborghini Gallardo ’04–’08 Titanium Straight-Pipe F1 Spec Ti Exhaust Without Valves

Full titanium race-spec X-pipe. Full titanium 2.5-in. tubing with X and H sections increases Gallardo exhaust performance with F1-style stone. Removes almost 100 lbs. from the rear of the vehicle over the OEM exhaust. Bolt-on application. No modifications needed.

972-233-0888
www.topspeedauto.com
PN: TITANIUM-LBG-PL-W/O

Top Speed Auto Accessories Inc.
Audi R8 ’09–’15 Titanium Straight X-Pipe Exhaust System

Full titanium race-spec X-pipe exhaust system for Audi R8 4.2L V8 ’08–’15 and 5.2L V10 ’09–’15. Bolt-on upgrade uses factory mounting points and tips for easy installation and no modification required. Deep, aggressive sound upgrade good for show or track. A 90% weight reduction over heavy OEM exhaust system.

972-233-0888
www.topspeedauto.com
PN: TITANIUM-AUDI-R8

Turnkey Trailers
Race Transporter

Turnkey all-aluminum trailers. Custom designed and built for the specific need. Anything from a full race trailer to engineering, support or hospitality. Tell Turnkey Trailers what’s required.

281-356-1386
www.tkind.com
PN: MODEL 9091

TrailFX
MaxFlow Extreme Exhaust System

MaxFlow Extreme exhaust systems combine everything desired in a performance exhaust system in one box for one great price. The 304 stainless-steel construction with 300-series weld filler ensures that the system will not pit or rust. Optional dual side or rear exits are included on most systems and broadcast a rich, deep, aggressive tone.

800-521-9999
www.trailfx.com
PN: 50301

T.V.K. Industries Inc.
Surematic

Customized illuminated gear-selection indicator shift knobs/levers for manual and automatic transmissions and transfer cases.

707-886-5003
www.sureshifter.com
PN: SSA 1

Vegalube
X1 0W20 1QT

Vegalube X1 0W20 full synthetic is a premium gasoline engine lubricant specially designed to meet the most demanding performance requirements of dexos1 Gen 2 specifications for gasoline-fueled General Motors vehicles. API SP, SN plus latest standards, ILSAC GF-6. Resource-conserving and advanced fuel economy.

385-282-5077
www.vegalube.com
PN: 0201Q

Vegalube
X1 0W20 5QT

Vegalube X1 0W20 full synthetic motor oil is a premium gasoline lubricant specially designed to meet the most demanding
performance requirements of dexos1 Gen 2 specifications for gasoline-fueled General Motors vehicles. API SP, SN plus latest
standards, ILSAC GF6. Resource-conserving and advanced fuel economy.

385-282-5077
www.vegalube.com
PN: 0205Q

Vegalube
X1 5W30 5QT

Vegalube X1 5W30 fully synthetic gasoline engine lubricant is specially designed to meet the most demanding performance requirements of dexos1 Gen 2 specifications for gasoline-fueled General Motors vehicles. API SP, SN plus latest standards, ILSAC GF6. Resource-conserving and advanced fuel economy.

385-282-5077
www.vegalube.com
PN: 5305Q

Vegalube
X1 5W30 1QT

Vegalube X1 5W30 full synthetic motor oil is a premium gasoline engine lubricant specially designed to meet the most demanding performance requirements of dexos1 Gen 2 specifications for gasoline-fueled General Motors vehicles. API SP, SN plus latest standards ILSAC GF-6. Resource-conserving and advanced fuel economy.

385-282-5077
www.vegalube.com
PN: 5301Q

Vortech Superchargers
’20 Ford 5.0L Mustang GT Supercharger System

A 50-state-legal complete system for the ’20 Ford 5.0L Mustang GT. Utilizing the venerable V-3 JT-trim supercharger and an air-to-air charge cooler, the complete system can boost a stock 5.0 GT to 692 hp and 584 lb.-ft. of torque with 7.5–8.5 psi using CA 91-octane fuel.

805-247-0226
www.vortechsuperchargers.com
PN: 4FQ218-230JT

Vortech Superchargers
V-30 Billet Mounting Bracket Assembly for BBC

New billet mounting bracket assembly, engineered to install the respected V-30 centrifugal supercharger onto big-block Chevy engines. The V-30 has proven to be the most reliable, efficient and consistent supercharger under the toughest racing conditions. Available for BBC engines. Kits range from 1,500–2,800 hp.

805-247-0226
www.vortechsuperchargers.com
PN: 4GB218-040

Vortech Superchargers
Ford 5.0L and 5.8L V-30 SC Mounting Brackets and Cog-Drive Assemblies

Bolt-on kit for 5.0L and 5.8L small-blocks using the potent V-30 centrifugal supercharger with new mounting brackets and cog-drive components designed for modified engines with extreme boost demands. Supports up to 1,400+ hp. Mounting brackets and cog-drive assemblies are available separately.

805-247-0226
www.vortechsuperchargers.com
PN: 4FP218-020

Wehrli Custom Fabrication
’17–’19 L5P Duramax Transmission Cooler Thermostat Bypass Plug

Replaces failure-prone OEM thermostat bypass used to warm transmission in cold weather, which can stick closed and cause dangerous fluid temperatures for hard-working built and stock transmissions in warmer weather. Improves fluid flow. Installs in minutes. Lowers transmission temperatures by as much as 50°F. Made in the U.S.A.

630-277-8239
www.wcfab.com
PN: WCF100469

Wehrli Custom Fabrication
’17–’19 L5P Duramax S400 Single-Turbo Installation Kit

Kit is capable of 1,000+ hp; allows installation of a BorgWarner S400 turbocharger (sold separately) on ’17–’19 L5P Duramax. Replaces OEM plumbing with high-flow 3-in.- and 3.5-in.-diameter piping and Y-bridge. Includes stainless-steel braided oil lines, down pipe, air box, filter and installation hardware. Custom powdercoat finishes. Made in the U.S.A.

630-277-8239
www.wcfab.com
PN: WCF100445

XClutch
Shelby GT350 5.2L 10.5-in. Twin-Disc Sprung Organic Clutch Upgrade

Kit is said to be the ideal solution for high-powered street vehicles up to 740 lb.-ft. of torque. The kit comes complete with a performance pressure plate, sprung organic friction discs, a chromoly flywheel, a replacement hydraulic release bearing, bolts and an alignment tool.

866-925-8824
www.xclutchusa.com
PN: XKFD27640-2A

XClutch
Mitsubishi Evo X Twin-Disc Sprung Organic Clutch Upgrade

Designed to suit the Mitsubishi Evo X, this XClutch upgrade has been designed to offer a performance clutch for high-powered street vehicles up to 740 lb.-ft. of torque while minimizing shock loading on the transmission. The kit includes a chromoly flywheel, a release bearing, bolts and an alignment tool. Ceramic option also available.

866-925-8824
www.xclutchusa.com
PN: XKMI23523-2A

XClutch
Subaru WRX STI Six-Speed Twin-Disc Sprung Organic Clutch Upgrade

Kit offers exceptional torque-holding capability while retaining drivability for the street and minimizing shock loading on the transmission. The kit offers a capacity of 740 lb.-ft. of torque and includes a chromoly flywheel, a release bearing, a pilot bearing and flywheel bolts. Ceramic option also available.

866-925-8824
www.xclutchusa.com
PN: XKSU23531-2A

XClutch
Corvette ZR1 LS9 9.0-in. Triple-Disc Ceramic Clutch Upgrade

Designed for motorsports applications up to 2,030 lb.-ft. of torque, this upgrade to suit the Corvette ZR1 LS9 includes a lightweight alloy pressure plate, a chromoly flywheel, a hydraulic release bearing, braided lines, bolts, a pilot bearing and an alignment tool. Organic option also available for high-power street use.

866-925-8824
www.xclutchusa.com
PN: XKCR23630-3E

Latest Related News

New Products

SEMA Data Product News

May 2023

View Article

New Products

The Newest Tires for 2022

February 2022

View Article

New Products

2021 SEMA Show New Products Showcase Spotlight Products

January 2022

View Article

Go-Fast Parts and Pieces From SEMA360

AEM Performance Electronics

PDU-8 Power Distribution Module

AEM Performance Electronics V3 Water/Methanol Injection System

Aeromotive Fuel Systems Direct-Fit Pump Modules for ’11–’17 Mustangs

Alcon Specialist Brakes & Clutches Porsche Replacement Rotors

Aeromotive Fuel Systems Fuel Pump and Hanger for ’88–’98 C/K 1500/2500 Chevy Trucks

Alcon Specialist Brakes & Clutches Corvette C7 Front and Rear Brake Upgrade

Alcon Specialist Brakes & Clutches GTR Replacement Rotors

Aldan American ’64–’66 Ford T-Bird FrontCoil-Over Kit

Aldan American ’63–’82 Corvette Front and Rear Suspension Kit

Aldan American ’88–’96 Corvette, Front Coil-Over Kit

Aldan American ’88–’98 C1500 Rear Shock Kit

Amsoil Inc. SAE 0W-20 LS Synthetic European Motor Oil

Amsoil Inc. SAE 0W-20 LS-VW Synthetic European Motor Oil

ASNU 1,450cc Injector

ASNU 40P Injector

ATI Performance Products Inc. SFI Flexplate and Crank Adapter for Toyota Supra B58

ATI Performance Products Inc. NHRA-Legal Factory Shootout 5% OD Ford Super Damper

ATI Performance Products Inc. 8L90E C7 Corvette 300M Output Shaft

ATI Performance Products Inc. Super Damper for Ford 7.3L Godzilla Engine

AutoMeter FiTech CAN Gauges

Baer Inc. Classic 13-in. Early GM Front Brake System

Baxter Performance Toyota Cartridge-to-Remote Oil Filter Adapter

Baer Inc. Classic 13-in. Early Mustang Front Brake System

Baxter Performance MOPAR Cartridge-to-Spin-On Oil Filter Adapter

Baxter Performance MOPAR Cartridge-to-Remote Oil Filter Adapter

Baxter Performance Ford Cartridge-to-Spin-On Oil Filter Adapter

Baxter Performance Ford Cartridge-to-Remote Oil Filter Adapter

Baxter Performance Inverted Remote Oil Filter Mount

Baxter Performance Toyota Cartridge-to-Spin-On Oil Filter Adapter

Baxter Performance Subaru Oil-Retaining Spin-On Adapter

BD Diesel Ford 6.7L Power Stroke Screamer Turbos

BD Diesel CAT C15/3406E T6 Mount Exhaust Manifold

Bilstein Shock Absorbers Evo SE

BlueDevil Products Radiator Flush

BlueDevil Products Head Gasket Sealer

BlueDevil Products Fuel System Cleaner

BlueDevil Products Oil Stop Leak

BluePrint Engines Builder-Series, GM-Style, Big-Block 632 Assembled Engine and Transmission Package With Billet Front Accessory Drive

BluePrint Engines Builder-Series, GM-Style LS 427 Assembled Engine and Transmission Package With Billet Front Accessory Drive

BluePrint Engines Builder-Series, GM-Style Small-Block 427 Assembled Engine and Transmission Package With Billet Front Accessory Drive

BluePrint Engines Builder-Series, Ford-Style 427 Assembled Engine and Transmission Package With Billet Front Accessory Drive

BluePrint Engines Builder-Series, Chrysler-Style Small-Block 408 Assembled Engine and Transmission Package With Billet Front Accessory Drive

BOOSTane, Octane Engineering BOOSTane Professional

BOOSTane, Octane Engineering BOOSTane Premium

BOOSTane, Octane Engineering BOOSTane Shot

Bully Dog & SCT Performance SCT Livewire Vision Performance Monitor

Bully Dog & SCT Performance SCT X4 Performance Programmer

Bully Dog & SCT Performance Bully Dog BDX Performance Programmer

Bully Dog & SCT Performance SCT Advantage III Custom Tuning Software

Carzoom Headlights

Cerebrum Smart Tire Technologies Smart Tire Sensor Solution

CFR Performance LT1 Gen V Cast Manifolds for Engine Swaps

Chevrolet SUV Performance 6.2L Dual-Exit Cat-Back Exhaust

Chevrolet SUV Performance Front Six-Piston Brembo Brake Upgrade

Chevrolet SUV Performance Rear Brake Upgrade System

Chevrolet SUV Performance 6.2L Cold-Air Intake

Chevrolet 350/265 Small-Block Engine

Chevrolet LS427/570 (Wet Sump) 7.0L Gen IV Engine

Chevrolet L8T 6.6L Gen V Iron Cylinder Block

Chevrolet Gen IV LS3-Based Long Blocks

Chevrolet Performance Exhaust

Chevrolet SuperMatic 10L90 Automatic Transmission

Classic Instruments 66–’67 Chevy Nova Direct-Fit Gauge Set

Coker Tire Phoenix Race Tires Stiff-Sidewall Slicks

Classic Instruments AutoCross Full-Sweep Gauges

Cometic Gasket Inc. T3 Divided Turbo Inlet Flange Gasket, .016-in. Stainless

Cometic Gasket Inc. GM LS1 V8 .060-in. HT Exhaust Header Gasket Set

Cometic Gasket Inc. Honda K20C1 .020-in. MLS Exhaust/Turbo Gasket

Coplus Inc. ’08–’20 Nissan 370Z Full LED Taillight

CP-Carrillo/Arias BMW B58 ’20 Toyota Supra Pistons and Rods

Covercraft Industries LLC Carbon Stretch Vehicle Covers

CP-Carrillo/Arias CP-Carrillo Bullet Big-Block Chevy Rods

CP-Carrillo/Arias High-End Steel Alloys for Drag Racing

CP-Carrillo/Arias GM LT Bullet Kit Pistons and Rods

CSF Cooling Racing & High Performance B8 Audi S4 High-Performance All-Aluminum Radiator

CSF Cooling Racing & High Performance Gen II/III Toyota Tacoma High-Performance All-Aluminum Radiator

CSF Cooling Racing & High Performance McLaren 720S Twin Intercooler Set

CSF Cooling Racing & High Performance Porsche 991.2/718 High-Performance All-Aluminum Side Radiator

AEM Performance Electronics
V3 Water/Methanol Injection System

Aeromotive Fuel Systems
Direct-Fit Pump Modules for ’11–’17 Mustangs

Alcon Specialist Brakes & Clutches
Porsche Replacement Rotors

Aeromotive Fuel Systems
Fuel Pump and Hanger for ’88–’98 C/K 1500/2500 Chevy Trucks

Alcon Specialist Brakes & Clutches
Corvette C7 Front and Rear Brake Upgrade

Alcon Specialist Brakes & Clutches
GTR Replacement Rotors

Aldan American
’64–’66 Ford T-Bird FrontCoil-Over Kit

Aldan American
’63–’82 Corvette Front and Rear Suspension Kit

Aldan American
’88–’96 Corvette, Front Coil-Over Kit

Aldan American
’88–’98 C1500 Rear Shock Kit

Amsoil Inc.
SAE 0W-20 LS Synthetic European Motor Oil

Amsoil Inc.
SAE 0W-20 LS-VW Synthetic European Motor Oil

ASNU
1,450cc Injector

ASNU
40P Injector

ATI Performance Products Inc.
SFI Flexplate and Crank Adapter for Toyota Supra B58

ATI Performance Products Inc.
NHRA-Legal Factory Shootout 5% OD Ford Super Damper

ATI Performance Products Inc.
8L90E C7 Corvette 300M Output Shaft

ATI Performance Products Inc.
Super Damper for Ford 7.3L Godzilla Engine

AutoMeter
FiTech CAN Gauges

Baer Inc.
Classic 13-in. Early GM Front Brake System

Baxter Performance
Toyota Cartridge-to-Remote Oil Filter Adapter

Baer Inc.
Classic 13-in. Early Mustang Front Brake System

Baxter Performance
MOPAR Cartridge-to-Spin-On Oil Filter Adapter

Baxter Performance
MOPAR Cartridge-to-Remote Oil Filter Adapter

Baxter Performance
Ford Cartridge-to-Spin-On Oil Filter Adapter

Baxter Performance
Ford Cartridge-to-Remote Oil Filter Adapter

Baxter Performance
Inverted Remote Oil Filter Mount

Baxter Performance
Toyota Cartridge-to-Spin-On Oil Filter Adapter

Baxter Performance
Subaru Oil-Retaining Spin-On Adapter

BD Diesel
Ford 6.7L Power Stroke Screamer Turbos

BD Diesel
CAT C15/3406E T6 Mount Exhaust Manifold

Bilstein Shock Absorbers
Evo SE

BlueDevil Products
Radiator Flush

BlueDevil Products
Head Gasket Sealer

BlueDevil Products
Fuel System Cleaner

BlueDevil Products
Oil Stop Leak

BluePrint Engines
Builder-Series, GM-Style, Big-Block 632 Assembled Engine and Transmission Package With Billet Front Accessory Drive

BluePrint Engines
Builder-Series, GM-Style LS 427 Assembled Engine and Transmission Package With Billet Front Accessory Drive

BluePrint Engines
Builder-Series, GM-Style Small-Block 427 Assembled Engine and Transmission Package With Billet Front Accessory Drive

BluePrint Engines
Builder-Series, Ford-Style 427 Assembled Engine and Transmission Package With Billet Front Accessory Drive

BluePrint Engines
Builder-Series, Chrysler-Style Small-Block 408 Assembled Engine and Transmission Package With Billet Front Accessory Drive

BOOSTane, Octane Engineering
BOOSTane Professional

BOOSTane, Octane Engineering
BOOSTane Premium

BOOSTane, Octane Engineering
BOOSTane Shot

Bully Dog & SCT Performance
SCT Livewire Vision Performance Monitor

Bully Dog & SCT Performance
SCT X4 Performance Programmer

Bully Dog & SCT Performance
Bully Dog BDX Performance Programmer

Bully Dog & SCT Performance
SCT Advantage III Custom Tuning Software

Carzoom
Headlights

Cerebrum Smart Tire Technologies
Smart Tire Sensor Solution

CFR Performance
LT1 Gen V Cast Manifolds for Engine Swaps

Chevrolet
SUV Performance 6.2L Dual-Exit Cat-Back Exhaust

Chevrolet
SUV Performance Front Six-Piston Brembo Brake Upgrade

Chevrolet
SUV Performance Rear Brake Upgrade System

Chevrolet
SUV Performance 6.2L Cold-Air Intake

Chevrolet
350/265 Small-Block Engine

Chevrolet
LS427/570 (Wet Sump) 7.0L Gen IV Engine

Chevrolet
L8T 6.6L Gen V Iron Cylinder Block

Chevrolet
Gen IV LS3-Based Long Blocks

Chevrolet
Performance Exhaust

Chevrolet
SuperMatic 10L90 Automatic Transmission

Classic Instruments
66–’67 Chevy Nova Direct-Fit Gauge Set

Coker Tire
Phoenix Race Tires Stiff-Sidewall Slicks

Classic Instruments
AutoCross Full-Sweep Gauges

Cometic Gasket Inc.
T3 Divided Turbo Inlet Flange Gasket, .016-in. Stainless

Cometic Gasket Inc.
GM LS1 V8 .060-in. HT Exhaust Header Gasket Set

Cometic Gasket Inc.
Honda K20C1 .020-in. MLS Exhaust/Turbo Gasket

Coplus Inc.
’08–’20 Nissan 370Z Full LED Taillight

CP-Carrillo/Arias
BMW B58 ’20 Toyota Supra Pistons and Rods

Covercraft Industries LLC
Carbon Stretch Vehicle Covers

CP-Carrillo/Arias
CP-Carrillo Bullet Big-Block Chevy Rods

CP-Carrillo/Arias
High-End Steel Alloys for Drag Racing

CP-Carrillo/Arias
GM LT Bullet Kit Pistons and Rods

CSF Cooling Racing & High Performance
B8 Audi S4 High-Performance All-Aluminum Radiator

CSF Cooling Racing & High Performance
Gen II/III Toyota Tacoma High-Performance All-Aluminum Radiator

CSF Cooling Racing & High Performance
McLaren 720S Twin Intercooler Set

CSF Cooling Racing & High Performance
Porsche 991.2/718 High-Performance All-Aluminum Side Radiator

CSF Cooling Racing & High Performance
Porsche 944 High-Performance All Aluminum Radiator

CSF Cooling Racing & High Performance
Porsche 991 GT2 RS Twin Intercooler Set

CSF Cooling Racing & High Performance
Porsche 911/930 Turbo OEM+ Performance Oil Cooler