The SEMA Data Excellence designation recognizes the companies that have worked with SEMA Data to recreate and relaunch industry-leading product data sets. Here are products from current SEMA Data members that have achieved data excellence.
J&L Oil Separator 3.0 Passenger Side (’15–’21 Hellcat, ’18–’21 Jeep Trackhawk, ’18 Demon, ’21 Durango Hellcat 6.2L)
During the process of venting crankcase pressure back through your intake track, large amounts of oil, in the form of vapors, intake tube, intake manifold runners dilute your gas, lowering its octane level. This happens on all engines and is even worse with forced inducted vehicles (supercharged and turbocharged) as crankcase pressures are increased. To combat this, we have developed an oil separator of our own design. Milled from solid billet aluminum, this is a rock-solid piece. It has a knurled tank base for easy removal to drain the spent oil and an O-ring seal to prevent any leaks. Filtering consists of a fine mesh stainless-steel screen that traps fine oil vapors and releases them once heavy enough to fall. They then pass through a 1/2-in. thick 1/16th-in. aluminum honeycomb filter, where they grow every larger and then fall into the bottom. By the time the oil gets through the filter it’s too heavy to be passed on into the intake. The tank holds 3 oz. of fluid, while that may not sound like a lot, you shouldn’t see that much oil in your PCV system. Drain it every 2,000–3,000 miles and you will never come close to filling it.
Features:
- 3-oz. capacity
- Solid billet construction
- OEM-style quick-connect PCV fittings
- Multi-stage filter system designed to collect the finest of vapors and drop them into the easily removable bottom while allowing clean air to pass through to the intake.
PN: 3060P-B
www.jlosc.com
FAST EZ 2.0 Base Kit with Touchscreen, Throttle Body and Inline Pump Kit
As with the EZ-EFI Fuel, simply hook up the system, answer the Setup Wizard questions on the hand-held, and EZ-EFI 2.0 Fuel + Ignition tunes itself as you drive. Its eight-injector, die-cast throttle body features late-model OEM sensors for accuracy and durability, supports up to 1,200 hp (the highest on the market), includes optional ignition timing control and can run E-85 fuels while competing versions cannot. It flows more air than the first-generation EZ-EFI throttle body due to an improved inlet, while a new secondary shaft throttle stop adjustment provides even more precise idle airflow adjustment and balance. Meanwhile, an industry-exclusive and unique-to-FAST integrated fuel pulse damper creates ultra-precise fuel control. The EZ-EFI 2.0 Fuel + Ignition also incorporates needle-bearing supported shafts instead of bushings and an integrated fuel rail design with crossover for tighter packaging. Setup includes the market’s fewest connection wires, including a high-quality wiring harness that is encased in a sleek mesh-type loom. The EZ-EFI 2.0 has an updated hand-held as well, featuring the industry’s first color touchscreen. Self-powered through the ECU rather than requiring an outside power source, it shares the same mounting points as the Garmin Nuvi GPS, meaning there are nearly limitless mounting options (suction cup mount is included with all kits). The hand-held has various advanced features, including screen hide/sleep function, expanded diagnostics and data screens, plus intuitive navigation. The FAST EZ-EFI 2.0 Fuel + Ignition works with either generation of EZ-EFI throttle body, multi-port systems and Inglese throttle bodies and is compatible with in-tank, inline, high-horsepower inline, return-style and return-less-style fuel pumps. Electronic fuel pressure measurement is standard on all kits, and each one works with a wet nitrous system, providing built-in nitrous timing retard and special nitrous AFR targeting.
Features:
- Higher flowing and higher-horsepower-capable, eight-injector throttle body supports stock-to-1,200hp engines.
- No laptop or tuning experience required; Self tunes as you drive with revised tuning strategy over original EZ-EFI.
- Advanced, color touchscreen, hand-held/sensor dash with suction-cup mount; same mounting points as Garmin GPS.
- Market’s only fuel pulse damper creates precise fuel control; return- or return-less-style fuel systems supported
- Works with standard, carb-type distributors or FAST distributors for plug-and-play electronic timing control.
- High-quality wiring harness with mesh loom and wide-band O2; system has fewest connection wires in market.
- Available in multi-port systems for GM LS engines and other multi-port EFI V8 engines.
- Throttle body features Holley carb-style throttle linkage and 4150 bolt pattern.
- ECU includes on-board LED diagnostics and EZ-Test indicator lights.
- E85-capable as opposed to competitor versions that are not.
PN: 30402-KIT
www.fuelairspark.com
ORACLE Flush Taillights for the Jeep Wrangler JL
Designed to fit flush with the rear of the Jeep Wrangler JL, the Flush Taillights from ORACLE Lighting offer new LED features and improved styling. This innovative design is a sleek taillight that wraps tightly around the body of the Jeep Wrangler JL. Protruding out significantly less than the factory taillights, this low-profile design helps avoid damage while trail riding. These taillights feature an attractive design and functional LED lighting features, including high-powered reverse lights and unique signature perimeter lighting. The plug-and-play design is compatible with both the base and LED packages and features an enhanced reverse function with 12 high-powered LEDs for optimal rear illumination. Gain sleek styling that complements the original body lines and offers more innovative features!
PN: 5884-504
www.oraclelights.com
Covercraft PrecisionFit Carhartt Front-Row Seat Covers
The ultimate Carhartt Seat Covers that combine the rugged protection and style you expect from Carhartt with an ultra-comfortable foam-backing to make any drive better. When it comes to protecting your vehicle's seats from the damaging effects of water, mud, grease, oil, food and dirt, Carhartt fabric is the protection you’ll love. Tough as nails, these covers are finely crafted and sewn from the firm-hand Carhartt duck weave fabric and double stitched at the main seams. Our Covercraft Carhartt PrecisionFit Seat Covers are custom fit for your exact vehicle seats. We tailor every seat cover to fit your factory seat like a second skin and never obstruct any of your factory seat knobs, levers, buttons or arm rests. If your vehicle has seat airbags, we use the same type of hidden tear-away stitching that are used on your factory seats for a sleek finished look that keeps your safety a priority. Carhartt has been known for their tough, rugged quality since 1889. Hamilton C. Carhartt, known as “Ham,” started his company in the harsh times of steel and locomotives. His motto was “Honest value for an honest dollar,” and that’s exactly what you’ll get with these legendary Carhartt Seat Covers available in Carhartt Brown or Carhartt Gravel. If you love the look and protection, but don’t need comfort as much, check out our Covercraft Carhartt SeatSavers.
Features:
- Exact fit
- Foam-backed comfort
- Pocket on back of front seat covers
- Heavy-duty material
- Highly water resistant
- Classic Carhartt styling
- Carhartt double-stitched seams
- All applicable headrests, armrests and console covers Included
- Sold per row; buckets (pair), bench (single)
- Hidden seat air-bag tear-away safety built-in
- Three-year warranty
PN: GTN671ABCABN
www.covercraft.com