By SEMA Editors
Platinum status represents SDC manufacturers that have achieved the pinnacle of product data by putting in the extra effort to provide resellers with the most complete data sets available.
Aeromotive Phantom Series: 2005-2017 GM Truck Direct Drop-In Pump Options
The 2005-2017 models used a larger factory fuel sending unit than the earlier 1999-2004 models. The larger size allows for more pump configurations than the earlier models. These tanks will accommodate; single 340, dual 340, and single 450, dual 450, and triple 450 pump configurations. The Silverado and Sierra tanks have a tank depth of approximately 12.625”, while the other models are more shallow and have depths around 8.25”. The new system will accommodate both of these tank depths. The 2500 truck models can have a deeper tank up to 17.00”; the system will also accommodate these depths as well. This product is not legal for sale or use on emission-controlled vehicles except when used as a direct replacement part matching OEM specifications.
American Car Craft Jeep Wrangler Accessories
American Car Craft designs and manufactures exceptional & unique high-quality aftermarket accessories for Jeep Wrangler. These precision-crafted Jeep Wrangler Accessories are an easy peel-and-stick install over the A/C vents. Fits all 2007-2018 Jeep Wrangler JK & 2018+ JL models. Our Jeep accessories are made from premium stainless steel that will not tarnish, fade, or rust. The kits include 4 A/C vent plates with 3M permanent adhesive backing. Laser-cut from brushed stainless steel with a polished bezel trim ring and then laser-etched with design.
Jeep – SKU 141001
Sahara – SKU 141004
Rubicon – SKU 141005
Trail Rated – SKU 141006
FAST Supercharger and Cam Power Packages for GM LS Engines
An Edelbrock Supercharger Kit and COMP Cams Cam Kit is the perfect pairing for performance enthusiasts looking for 850+ HP potential from their GM LS engines. FAST Supercharger & Cam Power Packages include a pump gas compatible supercharger pulley for break-in, initial tuning and general driving with other smaller pulleys also included for use with race fuel or E85. Additional pulleys and equipment are available for further fine tuning boost levels.
The Edelbrock Supercharger Kits include a 2300 TVS supercharger with an integrated intercooler. The intercooler is a high capacity, dual bar and plate design that enables big power gains through lower inlet air charge temps.
Also included is a COMP Cams application specific CK-Kit that contains a proprietary Low Shock Technology Camshaft designed specifically for GM LS supercharger applications, along with complementing pushrods, dual valve springs, tool steel retainers, locks, seats, seals and installation hardware.
LEED Ford Mustang Power Booster Kit
Upgrade your disc brake, factory manual transmission 64-66 Mustang to power brakes and dual bowl master cylinder! With a factory look this kit is designed to work with no modifications to your factory strut tower and export brace. In this power brake booster kit, you receive a 7" booster, mounting brackets, installation hardware, dual bowl master cylinder, brake pushrod, adjustable proportioning valve, which allows you to fine tune the amount of pressure your rear brakes receive in order to prevent rear wheel lockup. You’ll also receive the brake lines necessary to route from the new master cylinder to your factory 3 port distribution block and step-by-step installation instructions.
Note: Kit will only fit vehicles with factory manual transmission "Z Bar" linkage.
RHS 6 Bolt Heads
RHS Pro Elite CNC-Port 6-Bolt Cylinder Heads for GM LS3 Engines utilize the popular LS 6-bolt head design, making them compatible with the RHS® LS Race Block, GM LSX Block and OEM 4-bolt blocks.
These heads include an 11 (degree) valve angle and fully CNC-machined ports for improved airflow. The CNC-machined runners and chambers increase overall flow capability, while the revised water jacket design enhances thermal conductivity. Premium bronze valve guides hold precision tolerances on valve seat concentricity and the .700” thick deck and reinforced rocker rails make these cylinder heads ideal for high horsepower and boosted LS3 applications.
All RHS cylinder heads feature patented Clean Cast Technology which eliminates casting flaws and promotes a smoother internal surface finish for greater air and coolant flow. These benefits provide more power and cooling, right out of the box.